Sennheiser EK3253 manual Stereo/FOCUS selection ST-FOC, Hi-Bst

Page 25

Stereo/FOCUS selection – ST-FOC

Via the “ST-FOC” menu, you can switch between stereo and FOCUS operation.

In both operating modes, the corresponding transmitter has to be set to stereo operation.

When the receiver is set to stereo operation, the left-right signals are available as usual.

When the receiver is set to FOCUS operation, the left-right signals are mixed and are available as a mono signal in both headphone channels. With the / rocker button you can adjust the relative levels of the two separate channels in the mixed mono signal (see “Adjusting the balance/FOCUS” on page 17).

Limitingthe volumeat the headphone output –

LTD

Via the “LTD” menu, you can switch the limiter on or off. With the limiter switched on, the volume at the headphone output will be reduced.

Activating/deactivating the frequency boost –

HI-BST

Via the “HI-BST” menu, you can boost the AF frequency response at 10 kHz by approx. 6 dB. As a result, headphones with magnetic transducers sound better.

27

Image 25

Contents Instructions for use Contents Thank you for choosing Sennheiser Health risks arising from use Safety instructionsIntended use of the receiver Delivery includesImproper use Channel bank system EK 3253 bodypack receiverRecommended transmitters UP/DOWN Operating controlsIndications and displays Operation and battery status indicationLC display Mute display Modulation display of the received transmitterPilot display RF signal indicationDisplay backlighting Inserting and replacing the batteries Preparing the receiver for useInserting and charging the accupack Switching the receiver on/off Using the receiverConnecting the headphones Adjusting the volume Activating/deactivating the lock mode Adjusting the balance/FOCUSAttaching the receiver to clothing Buttons Operating menuOverview of menus Getting into the operating menu Working with the operating menuSelecting a menu Storing a setting Adjusting a settingExiting the operating menu Exit Operating menu of the receiverChan Selecting a channel Chan Adjustment tips for the operating menuScanning the channel bank for free channels Adjusting the squelch threshold SqelchStarting the scan and storing the scan result Releasing locked channelsImportant note HI-BST Stereo/FOCUS selection ST-FOCEntering a name Name Selecting the standard display DislpyActivating/deactivating the lock mode Lock Loading the factory-preset default settingsActivating/deactivating the pilot tone evaluation Pilot Exiting the operating menu Exit Error checklist If problems occurRecommendations and tips Maintenance and careFor the receiver For optimum receptionAdditional information Pilot tone squelch SquelchField strength-dependent squelch EK 3253 bodypack receiver SpecificationsAccessories Connector assignmentWarranty regulations