Selecting the standard display – DISLPY
Via the “DISPLY” menu, you can select the standard display:
Selectable standard display
Contents of standard display
“FREQ”
“NAME”
“CHAN”
Entering a name – NAME
Via the “NAME” menu, you can enter a freely selectable name for the receiver. You can, for example, enter the name of the performer for whom the adjustments have been made.
This name can be displayed on the standard display and can consist of up to six characters such as:
yletters (without pronounciation marks),
ynumbers from 0 to 9,
yspecial characters and spaces.
To enter a name, proceed as follows:
Press the SET button to get into the setting mode of the “NAME” menu. The first segment starts flashing on the display.
With the / rocker button you can now select a character. By briefly pressing a button, the display jumps either forwards or backwards to the next character. If you hold down a button,the display starts cyclingcontinuously.
28