LG Electronics LMV1825SBQ, MV1825SW service manual Removing the Turntable Motor

K. REMOVING THE TURNTABLE MOTOR

(1)Remove the turntable.

(2)Remove the turntable shaft VERY CAREFULLY with a slotted screwdriver. (Figure 20)

(3)Remove the base plate by removing 7 screws securing it to the oven cavity. (Figure 21)

(4)Disconnect the leadwire from the turntable motor terminals.

(5)Remove the 2 screws securing the turntable motor to the oven cavity ASS'Y. (Figure 22)

Figure 20

Figure 21

NOTES:

•Remove the leadwire from the turntable motor VERY CAREFULLY.

•Be sure to grasp the connector not the wires when removing.

Wire Leads

Turntable Motor

Figure 22

7-11