Roper SGS395X warranty Storage drawer, Is engaged

The storage drawer

The storage drawer IS for storing pots and pans. The drawer can be removed to make it easier to clean under the range, and to check for installation of the anti- tip bracket(s). Use care when handling the drawer.

Removing the storage drawer:

Replacing the storage drawer:	To verify	that the anti-tip
	bracket(s)	is engaged:

I---w

Lever

1.Empty drawer of any pots and pans before removing drawer. Pull drawer straight out to the stop.

2.Push up black plastic lever on both sides of drawer.

3.Pull drawer out a little farther untrl levers stay in “up” position. Pull drawer the rest of the way out.

Ball bearings

I.Make sure ball bearings on oven slide rail are positioned toward the front of the opening.

2.Fit ends of drawer slide rails into the oven slide rails on both sides of opening.

3.Slide drawer closed.

mRemove storage drawer.

1 Look to see if the anti-tip bracket(s) is attached to floor with screws.

mMake sure rear leveling leg(s) is positioned under bracket(s).

nSee “Important Safety Instructions” on page 2 and Installation Instructions for further detai!s.

NOTE: The range will not tip during normal use. Tipping can occur if excessive force or weight is applied to open door without anti-tip bracket(s) properly secured.

Page 7