Roper SGS395X warranty Lf the Self-Cleaning cycle, Will Not, Results a.renot, Vvhatto do

						CHECK IF
			.YOU pushed in knob(s) before trying to
			turn.
Lf the Self-Cleaning cycle			. The Oven Selector is set to CLEAN.
will	not	operate.	. A delay start time is set.
			1A stop time is set.
Cooking		results a.renot	mThe range			is level.
what	you expected.		mFlame	size		fits the cooking utensil
			being	used.
			1Pans are the size called for in the
			recipe.
			mYou are following a tested recipe from
			a reliable		source.
			1The cooking utensils have smooth, flat
			bottoms and fit the surface burners.
			. When baking, you have preheated the
			oven as the recipe calls for.
			1When baking, you have allowed 1 l/2
			to 2 inches (4-5 cm) on all sides of the
			pans for		air circulation.
			. When broiling, you have compietely
			closed the oven door. The broiler

provides best cooking results with the oven door closed.

The oven temperature . Your old oven was accurate. Your old

seems too low or too high. oven may have shifted gradually whfle your new oven may be more exact.

VVHATTO DO

n Push in knob(s) before turning.

n If needed, set the Oven Selector to CLEAN. l Wait until the delay start time has been

reached.

n See page 10 for instructions on how to set the Self-Cleaning cycle.

n Adjust leveling legs.

mAdjust flame size to fit cooking utensil.

l Use correct-size pans

mModify recipe or find a new recipe.

muse cooking utensils with smooth, flat bot- toms.

1Preheat the oven accordmg to recipe’s specifications.

mReposition pans for best air circulation.

mCompletely close oven door.

. If, after using the oven, you are not satisfied with the temperature settings, they can be adjusted by an authorized RopeISMservice technician. (See “Howto get service or assistance” on page 16.)

. Reset the clock, (page 4).

Page 14