LG Electronics LFC25760 manual About the Automatic Icemaker, Operation Instructions

Page 27

ABOUT THE AUTOMATIC ICEMAKER

WARNING

Personal Injury Hazard

Avoid contact with the moving parts of the ejector mechanism, or with the heating element that releases the cubes. DO NOT place fingers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

OPERATION INSTRUCTIONS

A newly-installed refrigerator may take 12 to 24 hours to begin making ice.

Icemaker

 

Automatic

 

Shut off Arm

Cube Size

Power Switch

Indicator Light

Cube Size

 

Select Button

The icemaker will produce eight cubes per cycle— approximately 100–130 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions.

If the refrigerator is used before the water connection is made to the icemaker, set the power switch to O (off).

When the refrigerator has been connected to the water supply, set the power switch to I (on).

The icemaker will fill with water when it cools to freezing. A newly-installed refrigerator may take 12 to 24 hours to begin making ice cubes.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.

It is normal for several cubes to be stuck together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale, and shrink.

NOTE: If the cube size is smaller or larger than you expected, you can regulate the size with the cube size button.

Every time you press the cube size button, the indicator moves up one light. The higher the light position, the larger the cubes will be. Pressing at the highest position returns the indicator to the lowest position.

WHEN YOU SHOULD SET THE ICEMAKER POWER SWITCH TO O (OFF)

•When the water supply will be shut off for several hours.

•When the ice storage bin is removed for more than a minute or two.

•When the refrigerator will not be used for several days.

NORMAL SOUNDS YOU MAY HEAR

•The icemaker water valve will buzz as the icemaker fills with water. If the power switch is in the I (on) position, it will buzz even if it has not yet been hooked up to water. To stop the buzzing, move the power switch to O (off).

NOTE: Keeping the power switch in the I (on) position before the water line is connected can damage the icemaker.

•You will hear the sound of cubes dropping into the bin and water running in the pipes as the icemaker refills.

PREPARING FOR VACATION

Set the icemaker power switch to O (off) and shut off the water supply to the refrigerator.

If the ambient temperature will drop below freezing, have a qualified servicer drain the water supply system to prevent serious property damage due to flooding from ruptured water lines or connections.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Congelador Inferior Refrigerador Table of Contents Appropriate option to locate your nearest LG LG ELECTRONICS, INC LG Refrigerator Limited Warranty USAAuthorized Service Center. Phones are answered Please call 1-800-243-0000 and chooseLimited Warranty Canada LG Refrigerator Safety Messages Read all instructions before using this applianceDo not modify or extend the power Cord length Recommended Grounding Method CFC DisposalGrounding Requirements To Connect ElectricityParts and Features Next Refrigerator InstallationInstallation Unpacking Your RefrigeratorHOW to Remove Door Handles Removing Refrigerator HandleRemoving Freezer Drawer Handle Screws Mounted On door HOW to Replace Door HandlesReplacing Refrigerator Door Handle Replacing Freezer Drawer HandleRight Door HOW to Remove Refrigerator DoorRemoving Refrigerator Door Left DoorReplacing Refrigerator Door Right Door Removing Pullout Drawer HOW to Remove and Install the Pullout DrawerInstalling Pullout Drawer Leveling and Door Alignment LevelingDoor Alignment MULTI-FLOW Using Your RefrigeratorSetting the Controls Ensuring Proper AIR CirculationFood Storage Guide Adjusting Control SettingsDo not use Storing Frozen FoodPackaging Packaging recommendationsSliding Out Shelves Adjusting ShelvesRefrigerator Shelves Bottle HolderOptibin Crispers Crisper Humidity ControlRemoving Crisper To remove the lattice on inner surface Crisper Cover with Lattice on Inner SurfaceTo remove the crisper door flap To remove the glassTo remove Glide‘N’Serve GLIDE‘N’SERVEModular Door BIN Cold Temp Control Colder ControlsDairy BIN ICE BINEGG BOX Durabase Durabase DividerPull OUT Drawer Care and Cleaning To change freezer light Power InterruptionsWhen YOU GO on Vacation When YOU MoveNormal Sounds YOU MAY Hear When YOU should SET the Icemaker Power Switch to O OFFAbout the Automatic Icemaker Operation InstructionsConnecting the Water Line Flush OUT the Tubing Fasten the Shutoff ValveConnect the Tubing to the Valve Tighten the Pipe ClampStart the Icemaker Connect the Tubing to the RefrigeratorTurn the Water on AT the Shutoff Valve Plug in the RefrigeratorCheck if… Then… Troubleshooting GuideRefer to the Setting the Controls section Understanding Sounds YOU MAY HearDoor Alignment section on See the Adjusting Control Settings sectionCompletely below See Leveling and Door Alignment onProduction. See the Setting the Controls Refer to the Understanding Sounds YouMay Hear section on See Doors will not close completely on Memo
Top Page Image Contents