Liebherr HC 1011/1060 HC 1001/1050 121113 7082698

Maintenance

u Clean the plastic surfaces, outside and inside, by hand using lukewarm water and a little dish washing liquid.

u To clean the drain opening: Remove deposits with a thin instrument, e.g. a cotton bud.

u Most of the equipment parts can be dismantled for cleaning: see the respective chapter.

u Clean the roller plates for the vegetable trays in the dishwasher.

u Clean the other fittings by hand using lukewarm water and a little dish washing liquid.

After cleaning:

u Wipe the appliance and accessories dry.

u Connect the appliance and switch it on again. u Switch on SuperFrost (see 5.7.4) .

When the temperature is sufficiently cold: u put the food back in the appliance.

6.3 Cleaning the IceMaker*

Fig. 7

The IceMaker must be switched on.

u Pull out the drawer and take out the ice.

u Clean the drawer with warm water and mild dish deter- gent.

u With the drawer pulled out, press and hold the On/Off button (for about 10 seconds).

w After about 1 second the LED goes out, the IceMaker is switched off.

w After about 10 seconds the LED flashes for about 60 seconds.

u Push the drawer in while the LED is flashing. w The ice tray of the IceMaker rotates and tilts. u Take out the drawer.

u Clean the ice tray with warm water. If necessary, use a mild dish detergent. Then rinse.

To switch the IceMaker on again:

u Press the ON/OFF button until the LED lights up, then push the drawer in.

w The IceMaker starts to produce ice cubes. If dish detergent was used:

u Throw out the first three batches of ice cubes to get rid of any soapy residues.

6.4 Replacing the interior light*

Light bulb data

q max. 25 W (25 W) q 120 V

q Bulb fitting: E14

q Current and voltage must agree with the details on the rating plate.

WARNING Danger of electric shock.

u First, remove the plug or switch off the fuse.

CAUTION Cutting hazard!

u To prevent possible injury due to broken glass, use hand protection when replacing the interior light.

u Take hold of the light cover at
the top and bottom Fig. 8 (1).	at
u .Unclip light cover Fig. 8 (2)	at
the back and unhook.
u Replace the light bulb Fig. 8 (3).
When turning it, use a little more
force to overcome the static fric-
tion of the seal. Make sure the
seal sits cleanly in the light
socket.		Fig. 8
u Hook the cover in again at the
back and clip in at the sides.

6.5 Customer service

First check whether you can remedy the fault yourself (see Troubleshooting). If this is not the case, please contact a qualified service provider.

WARNING

Risk of injury from repairs by non-professionals.

u Repairs and work on the appliance and the power supply cable not described in the Manual (see Mainte- nance) should only be carried out by a qualified service provider.

u Read the appliance designation

Fig. 9 (1), service no. Fig. 9 (2) and serial no. Fig. 9 (3) from the rating plate. The

rating plate is located inside the appliance on the left-hand side.

Fig. 9 u Notify a qualified service provider, specifying the fault, appliance designation Fig. 9 (1), service no. Fig. 9 (2)

and serial Fig. 9 (3) no.

w This will help us to provide you with a faster and more accurate service.


* Depending on model and options	13

HC 1011/1060 HC 1001/1050 121113 7082698 - 00 specifications

The Liebherr HC 1011/1060 and HC 1001/1050 are part of the esteemed Liebherr line of high-performance hoists and cranes. These models are designed specifically for heavy lifting and material transport in various industrial applications. Liebherr is widely recognized for its commitment to innovation and reliability, and the HC series exemplifies this dedication.

One of the main features of the HC 1011/1060 and HC 1001/1050 is their impressive lifting capacity. These cranes can handle significant loads, making them ideal for construction sites and heavy-duty operations. Their robust design ensures they can withstand harsh working conditions while maintaining safety and performance quality.

The HC series incorporates advanced technologies aimed at enhancing efficiency and user experience. For instance, Liebherr has integrated modern control systems that offer precise load management, ensuring optimal performance during operation. These control systems are user-friendly and can be easily navigated, allowing operators to efficiently manage lifting operations with greater confidence.

Safety is paramount in the design of the HC 1011/1060 and HC 1001/1050. The models are equipped with state-of-the-art safety features, including overload protection and advanced monitoring systems that alert operators to potential issues before they become significant problems. This focus on safety not only protects the equipment but also ensures the welfare of the operators and the surrounding workforce.

Durability is another characteristic that sets Liebherr's HC series apart. Constructed with high-quality materials, the HC 1011/1060 and HC 1001/1050 are designed to endure the rigors of continuous use in demanding environments. This durability translates to reduced maintenance costs and extended lifespans for the equipment, providing significant value to users.

In terms of versatility, these cranes can be adapted for various applications. Whether used in construction, shipping, or industrial manufacturing, the HC series can be configured to meet the specific needs of any project. Their compact design allows for easy maneuverability in tight spaces, enhancing their functionality across different sites.

The Liebherr HC 1011/1060 and HC 1001/1050 cranes are not just machines; they embody the company's ethos of quality, innovation, and reliability. Their cutting-edge technologies, robust safety features, and exceptional lifting capabilities make them essential equipment for any heavy-duty lifting task. As industries continue to evolve, Liebherr remains at the forefront, providing solutions that meet the demands of modern construction and heavy lifting.