Liebherr HC 1011/1060 HC 1001/1050 121113 7082698 - 00 Problem Possible Cause Correction, Enough

Page 16

Troubleshooting

Problem

Possible Cause

Correction

 

There is a blocked filter at the end of

 

u Clean the filters.

 

the water supply hose or at the

 

 

 

connecting part on the machine.

 

 

 

The waterline was not bled of all air

 

u Please contact your qualified installation plumber to

 

during installation

 

ensure the above criteria is met before calling for

 

 

 

service.

The temperature

The door of the appliance is not

 

u Close the appliance door.

is not cold

closed properly.

 

 

enough.

Insufficient ventilation.

 

u Clear ventilation grilles.

 

The ambient temperature is too high.

 

u Solution: (see 1.3)

 

The appliance was opened too

 

u Wait to see whether the required temperature resets

 

frequently or for too long.

 

itself by itself. If not, contact the customer service

 

 

 

department (see Maintenance).

 

Too much fresh food was placed

u Solution: (see 5.7.4)

 

inside without SuperFrost.

 

 

 

The temperature is incorrectly set.

u Set to a colder temperature and check after 24 hours

 

The appliance is too near to a heat

u Change location of appliance or the heat source.

 

source (stove, heater etc).

 

 

Display show

The freezer temperature display will

 

u When initially starting the appliance it will not be

two dashes (“-

only show temperatures that are

 

below freezing. It will take three to five hours

-”).

below freezing.

 

(depending on ambient conditions) for freezing

 

 

 

temperatures to be achieved and thus displayed

 

 

 

numerically.

 

The freezer temperature has risen

u See also “Power failure” and “nA”

 

above zero degrees due to a power

 

 

 

failure or power interruption.

 

 

The interior light

The appliance is not switched on.

u Switch on the appliance.

is not on.

The door was open for longer than

 

u The interior light automatically switches itself off if

 

15 minutes.

 

the door has been open for about 15 minutes.

 

The LED interior light is faulty or the

 

 

 

 

 

 

cover is damaged*

 

WARNING*

 

 

Risk of injury from electrical shock.

 

 

Live parts are under the cover.

 

 

u The LED interior light should only be replaced or

 

 

 

repaired by the Customer Service department or by

 

 

 

engineers trained to do so.

 

 

 

 

 

 

 

WARNING*

 

 

Risk of injury from LED lamp!

 

 

The lighting intensity of the LED light complies with laser

 

 

 

class 1/1M.

 

 

 

If the cover is faulty:

 

 

 

u Do not gaze directly at this lighting unit with optical

 

 

 

lenses while very close to the light source. This can

 

 

 

cause damage to your eyes.

 

 

 

 

 

 

 

16

* Depending on model and options

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Use and Care Manual Appliance at a glance Contents Appliance at a glanceInstructions for testing institutes OverviewRange of appliance use ConformityGeneral safety information Energy savingControls and displays Start-upConnecting the appliance Disposal of packagingSwitching on the appliance Temperature display unitBrightness of the temperature display OperationTemperature alarm Door alarmFridge compartment Setting the temperature Using the split shelfSuperCool 5 FanFreezer compartment SuperFrost DrawersVarioSpace Info systemCleaning the appliance MaintenanceDefrosting with NoFrost Cleaning the IceMaker Customer serviceAfter cleaning Replacing the interior lightTroubleshooting Appliance InformationProblem Possible Cause Correction Faint clicking Switches onMechanism Temperature Cates F0 to F5 TemperatureProblem Possible Cause Correction Is not coldEnough Display showLiebherr Warranty Plan Putting appliance out of serviceDisposing of the appliance Terms Applicable to Each Warranty Liebherr Warranty Plan For Service in the U.S Liebherr Service Center For Service in CanadaToll Free 1-866-LIEBHER or Toll Free 1-888-LIEBHER or

HC 1011/1060 HC 1001/1050 121113 7082698 - 00 specifications

The Liebherr HC 1011/1060 and HC 1001/1050 are part of the esteemed Liebherr line of high-performance hoists and cranes. These models are designed specifically for heavy lifting and material transport in various industrial applications. Liebherr is widely recognized for its commitment to innovation and reliability, and the HC series exemplifies this dedication.

One of the main features of the HC 1011/1060 and HC 1001/1050 is their impressive lifting capacity. These cranes can handle significant loads, making them ideal for construction sites and heavy-duty operations. Their robust design ensures they can withstand harsh working conditions while maintaining safety and performance quality.

The HC series incorporates advanced technologies aimed at enhancing efficiency and user experience. For instance, Liebherr has integrated modern control systems that offer precise load management, ensuring optimal performance during operation. These control systems are user-friendly and can be easily navigated, allowing operators to efficiently manage lifting operations with greater confidence.

Safety is paramount in the design of the HC 1011/1060 and HC 1001/1050. The models are equipped with state-of-the-art safety features, including overload protection and advanced monitoring systems that alert operators to potential issues before they become significant problems. This focus on safety not only protects the equipment but also ensures the welfare of the operators and the surrounding workforce.

Durability is another characteristic that sets Liebherr's HC series apart. Constructed with high-quality materials, the HC 1011/1060 and HC 1001/1050 are designed to endure the rigors of continuous use in demanding environments. This durability translates to reduced maintenance costs and extended lifespans for the equipment, providing significant value to users.

In terms of versatility, these cranes can be adapted for various applications. Whether used in construction, shipping, or industrial manufacturing, the HC series can be configured to meet the specific needs of any project. Their compact design allows for easy maneuverability in tight spaces, enhancing their functionality across different sites.

The Liebherr HC 1011/1060 and HC 1001/1050 cranes are not just machines; they embody the company's ethos of quality, innovation, and reliability. Their cutting-edge technologies, robust safety features, and exceptional lifting capabilities make them essential equipment for any heavy-duty lifting task. As industries continue to evolve, Liebherr remains at the forefront, providing solutions that meet the demands of modern construction and heavy lifting.
Top Page Image Contents