Liebherr HC 1011/1060 HC 1001/1050 121113 7082698 - 00 Operation, Switching on the appliance

Page 7

Operation

-To reduce the risk of fire, electric shock, or personal injury, installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction.

-The Power Plug must be easily accessible so that the appliance can be disconnected from the mains quickly in an emergency. It must not be behind the back of the appliance.

-The top of the electric outlet must be located within 82-5/8 in. (2100 mm) from the top of the base in the cabinet.

4.5 Switching on the appliance

Note

u To switch on the entire appliance, only the freezer compartment needs to be switched on.

Switch on the appliance 2 hours before loading with frozen food for the first time.

Do not load frozen foods until the temperature display reads 0 °F (-18 °C).

4.5.1 Switching on the freezer compartment

u Open the door.

u Press On/Off button, freezer compartment Fig. 2 (3).

w The refrigerator compartment temperature display indi- cates the set temperature.

w The temperature display for the freezer compartment will flash until the temperature is cold enough. If the temperature is greater than 32 °F (0 °C), flashing dashes will appear; if the temperature is lower than this, the set temperature will flash on the display.

4.5.2 Switching on the fridge compartment

u Open the door.

u Press Fridge compartment On/Off button Fig. 2 (11). w The interior light comes on when the door is opened. w The temperature display flashes. The fridge compart-

ment is switched on.

5 Operation

5.1 Temperature display unit

The temperature display can be changed from °F to °C.

5.1.1 To change the unit

u Activate setting mode: Press SuperFrost button Fig. 2 (2) for about 5 seconds.

w The SuperFrost button Fig. 2 (2) will flash. w c is displayed in the temperature display.

u Using

Freezer

compartment

Up

button

Fig. 2 (5)/ Freezer compartment Down button

Fig. 2 (4) select °.

 

 

button

u To confirm: Briefly press SuperFrost

Fig. 2 (2).

compartment

Up

button

u Using

Freezer

Fig. 2 (5)/ Freezer compartment Down button

Fig. 2 (4) select °F or °C.

 

button

u To confirm: Briefly press SuperFrost

Fig. 2 (2).

mode: Press

Freezer compartment

u To exit

setting

On/Off button Fig. 2 (3).

 

 

-or-

 

 

 

 

u Wait 5 minutes.

 

 

 

w The temperature is again displayed in the temperature display.

5.2Brightness of the temperature display

You can adapt the brightness of the temperature display to the light conditions in the room in which it is installed.

5.2.1 Setting the brightness

The brightness can be set between h1 (minimum lumi- nosity) and h5 (maximum luminosity).

u To activate setting mode: Press SuperFrost button Fig. 2 (2) for about 5 seconds.

w c is shown on the display.

w The SuperFrost button will flash.

u Press Freezer compartment Up button Fig. 2 (5) or

Freezer compartment Down button Fig. 2 (4) to select h. u To confirm: Briefly press SuperFrost button Fig. 2 (2). u To set the display brighter: Press Freezer

compartment Up button Fig. 2 (5).

u To set the display darker: Press Freezer compartment Down button Fig. 2 (4).

u To confirm: Press SuperFrost button Fig. 2 (2). w The brightness is set to the new value.

u To deactivate setting mode: Press Freezer compart- ment On/Off button Fig. 2 (3).

-or-

u Wait 5 minutes.

w The temperature is again displayed in the temperature display.

5.3 Child-proof lock

You can use the child-proof lock to lock the buttons. This means that children cannot acci- dentally switch off the appliance when playing.

5.3.1 Switching on the child-proof lock

u To activate setting mode: Press SuperFrost button Fig. 2 (2) for about 5 seconds.

w c is shown on the display.

w The SuperFrost button will flash.

 

 

 

* Depending on model and options

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Use and Care Manual Appliance at a glance Appliance at a glance ContentsConformity Instructions for testing institutesOverview Range of appliance useEnergy saving General safety informationStart-up Controls and displaysDisposal of packaging Connecting the applianceOperation Switching on the applianceTemperature display unit Brightness of the temperature displayTemperature alarm Door alarmFridge compartment 5 Fan Setting the temperatureUsing the split shelf SuperCoolFreezer compartment Info system SuperFrostDrawers VarioSpaceCleaning the appliance MaintenanceDefrosting with NoFrost Replacing the interior light Cleaning the IceMakerCustomer service After cleaningAppliance Information TroubleshootingCates F0 to F5 Temperature Problem Possible Cause Correction Faint clickingSwitches on Mechanism TemperatureDisplay show Problem Possible Cause CorrectionIs not cold EnoughLiebherr Warranty Plan Putting appliance out of serviceDisposing of the appliance Terms Applicable to Each Warranty Liebherr Warranty Plan Toll Free 1-888-LIEBHER or For Service in the U.S Liebherr Service CenterFor Service in Canada Toll Free 1-866-LIEBHER or

HC 1011/1060 HC 1001/1050 121113 7082698 - 00 specifications

The Liebherr HC 1011/1060 and HC 1001/1050 are part of the esteemed Liebherr line of high-performance hoists and cranes. These models are designed specifically for heavy lifting and material transport in various industrial applications. Liebherr is widely recognized for its commitment to innovation and reliability, and the HC series exemplifies this dedication.

One of the main features of the HC 1011/1060 and HC 1001/1050 is their impressive lifting capacity. These cranes can handle significant loads, making them ideal for construction sites and heavy-duty operations. Their robust design ensures they can withstand harsh working conditions while maintaining safety and performance quality.

The HC series incorporates advanced technologies aimed at enhancing efficiency and user experience. For instance, Liebherr has integrated modern control systems that offer precise load management, ensuring optimal performance during operation. These control systems are user-friendly and can be easily navigated, allowing operators to efficiently manage lifting operations with greater confidence.

Safety is paramount in the design of the HC 1011/1060 and HC 1001/1050. The models are equipped with state-of-the-art safety features, including overload protection and advanced monitoring systems that alert operators to potential issues before they become significant problems. This focus on safety not only protects the equipment but also ensures the welfare of the operators and the surrounding workforce.

Durability is another characteristic that sets Liebherr's HC series apart. Constructed with high-quality materials, the HC 1011/1060 and HC 1001/1050 are designed to endure the rigors of continuous use in demanding environments. This durability translates to reduced maintenance costs and extended lifespans for the equipment, providing significant value to users.

In terms of versatility, these cranes can be adapted for various applications. Whether used in construction, shipping, or industrial manufacturing, the HC series can be configured to meet the specific needs of any project. Their compact design allows for easy maneuverability in tight spaces, enhancing their functionality across different sites.

The Liebherr HC 1011/1060 and HC 1001/1050 cranes are not just machines; they embody the company's ethos of quality, innovation, and reliability. Their cutting-edge technologies, robust safety features, and exceptional lifting capabilities make them essential equipment for any heavy-duty lifting task. As industries continue to evolve, Liebherr remains at the forefront, providing solutions that meet the demands of modern construction and heavy lifting.
Top Page Image Contents