Liebherr CS 7081411-00, HC 7081411-00 Temperature Display Figure, Audible alarm signal Figure

Page 11

OPERATION

Temperature Display - Figure 8

In normal operation, the following settings will be displayed:

•the average refrigerator temperature

•the warmest frozen food temperature.

When starting up for the first time or when the appliance is warm, dashes

will appear in the freezer temperature

display, until the temperature in the freezer compartment is 32°F (0°C).

It will take between three and eight hours for the required temperature, 0°F or 38°F (-18°C or 3°C) to be reached and displayed permanently in the dis- play, depending on the ambient conditions and the temperature setting.

The display will flash:

•if you change the temperature or

•if the temperature rises by several degrees, indi- cating cold loss, e.g. if you place fresh, “warm” food in the freezer or if you remove or repack frozen food, the temperature may rise for a short time due to warm air flowing into the freezer.

•If “F1” to “F5” appears in the display, the appli- ance has a fault. Have the fault number available when you contact the customer service depart- ment.

Audible alarm signal - Figure 8

The audible alarm signal helps to protect frozen food and to save energy.

The audible alarm signal is switched off by touching the alarm icon.

Audible door alarm

This sounds when the door has been left open for longer than about 180 seconds. The sound switch- off function is active as long as the door is left open. The alarm automatically switches back to standby when the door is shut.

Audible/visual temperature alarm

It always sounds if the freezer temperature is not low enough. The temperature display and the alarm LED flashes at the same time.

This can be caused by:

-warm, fresh food being placed in the freezer;

-too much warm air from the outside entering when re-arranging or removing frozen food,

-a fault in the appliance.

The temperature display will continue to flash until the cause of the alarm has been rectified. It will then stop flashing and light up continually. The audible warning signal is now automatically reset.

Power Failure/Frost-Control

Display - Figure 8

If the power failure LED is lit, this means the freezer temperature has risen too high during the last few hours or days due to a power failure. The freezer temperature display flashes at the same time.

•If you touch the Alarm icon now, the highest temperature registered during the power failure will be displayed.

•Check the quality of the food in case it has become too warm or even defrosted.

•The highest temperature will appear for approximately one minute. After that, the actual temperature in the freezer will reappear.

The display can be turned OFF by touching the Alarm icon again.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Use and Care Manual Additional benefits Table of Contents Disposal of Old Appliance SafetyElectrical Safety Please read and follow these instructionsImportant Safety Information Disposal of Carton Safety RegulationsRemoving the Water Filter Figure Installing the Water FilterWater Filter Water Filter FigureDescription of Freezer FeaturesDescription of appliance and equipment Figure Description of RefrigeratorOperating icons Control icons Temperature and control displayOperating and Control Elements , Figure ApplianceOperation Setting the Temperature FigureTo reduce the temperature To increase the temperaturePower Failure/Frost-Control Temperature Display FigureAudible alarm signal Figure Exit setup mode How to activate the setup modeHow to activate the door gasket heating = Sabbath ModeHow to activate the Sabbath Mode How to deactivate the Sabbath ModeHow to adjust the water quantity Setup Mode Figure= Temperature display mode How to change the temperature display to degrees CelsiusHow to deactivate the childproof lock = Drop symbol resetHow to reset the drop symbol How to activate the childproof lockRepositioning the door racks Figure To install the vegetable drawerRefrigerator Compartment Arranging Food Figure Shelf ArrangementRemoving the shelves Figure Interior LightRepositioning the shelves Figure Freezing capacity Figure Freezer CompartmentFreezer compartment description Freezing and Storage Freezing with Superfrost FigureTo turn the Ice Maker on Safety InstructionsIcemaker To Start the Ice MakerState How to activate the Ice Maker VacationIce Maker at vacations Cleaning CleaningVacation Tips DEFROSTING/VACATIONDefrosting Problem Possible Cause and Remedy TroubleshootingAppliance Information IceMaker TroubleshootingCustomer Service Figure Service Number 2 and Appliance / serial numberLiebherr Warranty Plan Warranty

CS 7081411-00, HCS 7081411-00, HC 7081411-00 specifications

The Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are advanced construction and material handling equipment that exemplify the latest in engineering and technological innovation. These components are part of Liebherr's renowned line of machinery, recognized for their exceptional performance, reliability, and efficiency.

One of the main features of these models is their robust build quality. Designed to withstand demanding environments, the HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are constructed from high-strength materials that ensure durability. This resilience gives operators peace of mind when dealing with heavy loads or harsh working conditions. The engineering behind these models also includes precision and attention to detail, allowing for seamless operation across various job sites.

These models incorporate state-of-the-art technologies that enhance productivity and operational efficiency. For instance, they are equipped with advanced hydraulic systems that provide smooth and responsive load handling capabilities. This allows operators to perform tasks with precision, minimizing the time spent on each job and increasing overall productivity. Additionally, the integrated control systems offer user-friendly interfaces that simplify operation, making it easier for both experienced operators and newcomers.

Another key characteristic of the Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 is their versatility. These models can be configured for a wide range of applications, from construction to logistics, thanks to their modular design and adaptability. This flexibility allows companies to use the same piece of equipment across different projects, making it a cost-effective solution for businesses looking to optimize their operations.

Moreover, Liebherr places significant emphasis on safety, and these models are no exception. They come with several safety features designed to protect both the operator and the surrounding environment. These include robust stabilization systems, automatic shut-off mechanisms, and ergonomic controls that facilitate safe and efficient operation.

In summary, the Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are exemplary pieces of machinery in the construction and material handling sectors. With their robust build quality, advanced technologies, versatility, and commitment to safety, these models are designed to meet the diverse needs of modern industries while enhancing productivity and operational excellence. Whether used for heavy lifting, logistical applications, or construction tasks, they represent a trusted and reliable choice for professionals in the field.
Top Page Image Contents