Liebherr CS 7081411-00, HC 7081411-00 manual Interior Light, Repositioning the shelves Figure

Page 17

REFRIGERATOR COMPARTMENT

Repositioning the shelves - Figure 14

1.Hold the shelf underneath with your hand to avoid from tipping down backwards when removing.

2.Lift the shelf at the front.

3.Remove the shelf forward until the circular cutout of the shelf is in line with the interior light cover.

4.Lift the shelf up or down and replace in the desired position.

Interior lightcover

Figure 14

Removing the shelves - Figure 15

1.Follow the first three steps in the chapter above.

2.Lift the shelf down and stop just over the upper vegetable bin.

3.Move the front of the shelf upwards until the shelf is in a vertical position.

4.Turn the shelf counterclockwise and remove.

To avoid from falling down, always hold the shelf with both hands when removing.

Figure 15

Interior Light

The interior light is located at the left, right and top in the refrigerator compartment (Figure 16) and above each drawer in the freezer comartment. It turns on if one of the doors or one freezer drawer is opened.

The interior light emits class 1M laser radiation. DO NOT look directly at light or through any optical instruments when the light cover is removed. Severe eye injury can occur.

The light turns OFF automatically if one of the doors or one freezer drawer has been opened for approximately 15 minutes. The audible alarm sounds at the same time.

If one light is not lit, it is defective.

The interior light may only be replaced by the customer service technician or by competent skilled personnel!

Do not try to change the defective lighting yourself!

Figure 16

17

Image 17
Contents Use and Care Manual Additional benefits Table of Contents Electrical Safety SafetyPlease read and follow these instructions Disposal of Old ApplianceImportant Safety Information Disposal of Carton Safety RegulationsWater Filter Installing the Water FilterWater Filter Figure Removing the Water Filter FigureDescription of appliance and equipment Figure FeaturesDescription of Refrigerator Description of FreezerOperating and Control Elements , Figure Temperature and control displayAppliance Operating icons Control iconsTo reduce the temperature Setting the Temperature FigureTo increase the temperature OperationPower Failure/Frost-Control Temperature Display FigureAudible alarm signal Figure Exit setup mode How to activate the setup modeHow to activate the Sabbath Mode = Sabbath ModeHow to deactivate the Sabbath Mode How to activate the door gasket heating= Temperature display mode Setup Mode FigureHow to change the temperature display to degrees Celsius How to adjust the water quantityHow to reset the drop symbol = Drop symbol resetHow to activate the childproof lock How to deactivate the childproof lockRefrigerator Compartment To install the vegetable drawerArranging Food Figure Shelf Arrangement Repositioning the door racks FigureRemoving the shelves Figure Interior LightRepositioning the shelves Figure Freezing capacity Figure Freezer CompartmentFreezer compartment description Freezing and Storage Freezing with Superfrost FigureIcemaker Safety InstructionsTo Start the Ice Maker To turn the Ice Maker onState How to activate the Ice Maker VacationIce Maker at vacations Cleaning CleaningVacation Tips DEFROSTING/VACATIONDefrosting Problem Possible Cause and Remedy TroubleshootingCustomer Service Figure IceMaker TroubleshootingService Number 2 and Appliance / serial number Appliance InformationLiebherr Warranty Plan Warranty

CS 7081411-00, HCS 7081411-00, HC 7081411-00 specifications

The Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are advanced construction and material handling equipment that exemplify the latest in engineering and technological innovation. These components are part of Liebherr's renowned line of machinery, recognized for their exceptional performance, reliability, and efficiency.

One of the main features of these models is their robust build quality. Designed to withstand demanding environments, the HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are constructed from high-strength materials that ensure durability. This resilience gives operators peace of mind when dealing with heavy loads or harsh working conditions. The engineering behind these models also includes precision and attention to detail, allowing for seamless operation across various job sites.

These models incorporate state-of-the-art technologies that enhance productivity and operational efficiency. For instance, they are equipped with advanced hydraulic systems that provide smooth and responsive load handling capabilities. This allows operators to perform tasks with precision, minimizing the time spent on each job and increasing overall productivity. Additionally, the integrated control systems offer user-friendly interfaces that simplify operation, making it easier for both experienced operators and newcomers.

Another key characteristic of the Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 is their versatility. These models can be configured for a wide range of applications, from construction to logistics, thanks to their modular design and adaptability. This flexibility allows companies to use the same piece of equipment across different projects, making it a cost-effective solution for businesses looking to optimize their operations.

Moreover, Liebherr places significant emphasis on safety, and these models are no exception. They come with several safety features designed to protect both the operator and the surrounding environment. These include robust stabilization systems, automatic shut-off mechanisms, and ergonomic controls that facilitate safe and efficient operation.

In summary, the Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are exemplary pieces of machinery in the construction and material handling sectors. With their robust build quality, advanced technologies, versatility, and commitment to safety, these models are designed to meet the diverse needs of modern industries while enhancing productivity and operational excellence. Whether used for heavy lifting, logistical applications, or construction tasks, they represent a trusted and reliable choice for professionals in the field.