Liebherr HCS 7081411-00, HC 7081411-00 manual Cleaning

Page 22

CLEANING

Cleaning

•To prevent possible injury due to an electrical shock, be sure to disconnect the power cord or turn OFF the circuit breaker before cleaning the appliance.

•To avoid injury or damage, do not use steam cleaning equipment to clean the appliance.

A compound of lukewarm water and dishwasher detergent is recommended for cleaning the appli- ance and equipment parts.

Use for stainless steel surfaces a good quality stainless steel cleaner only.

Do not use abrasive or scouring sponges. Do not use concentrated cleaning agents. NEVER use abrasive or acid cleaners or chemical solvents.

To avoid short-circuits, ensure no cleaning water penetrates into the electrical components when cleaning the appliance. Do not use a sponge or cloth that is overly wet.

•Remove all food from the refrigerator and freezer compartments and store on a cool place tempo- rarily. Store frozen food in other freezers if avail- able.

•Remove the door racks as shown in Figure 14.

•Remove vegetable drawers as shown in Figure 15.

•Remove glass shelves as shown in Figure 17.

•Pull out the upper freezer drawer completely. Remove the ice cube bin by moving upwards. The position of the ice cube bin is shown in Figure 19.

•Clean the equipment parts by hand with luke- warm water and dishwasher detergent.

Do not clean the equipment parts in a dishwasher. Strips of these parts could get loose.

•Clean the refrigerator and freezer drawers inte- rior with lukewarm water and dishwasher deter- gent.

•Dry all parts well with a cloth.

•Do not damage or remove the model plate on the inside of the appliance. It is very important for servicing your appliance.

Keep your stainless steel looking new by cleaning with a good quality stainless steel cleaner or polish monthly. High quality stainless steel cleaners and conditioners are commercially available.

DO NOT CLEAN WITH STEEL WOOL PADS or ABRASIVE PADS. Do not use cleaners that are not for use on stainless steel, such as glass, tile or counter cleaners. These types of cleaners can damage the surface permanently.

Stainless steel that is exposed to chlorine gas and moisture may have some discoloration. This discol- oration is normal. If your unit is used in this environ- ment, clean and polish your stainless steel more often.

If the surface discolors or rusting appears, clean it quickly with a non-abrasive cloth and protect it. Always clean and polish in the direction of the grain and finish.

•Open the bottom freezer drawer and unscrew the ventilation grille Figure 24.

•Remove the dust filter (Figure 25) and clean in a dishwasher or by hand with lukewarm water and dishwasher detergent.

•Install the dust filter and ventilation grille.

•Install all equipment parts and replace the food in the appliance.

•Turn the appliance on.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Use and Care Manual Additional benefits Table of Contents Please read and follow these instructions SafetyElectrical Safety Disposal of Old ApplianceImportant Safety Information Safety Regulations Disposal of CartonWater Filter Figure Installing the Water FilterWater Filter Removing the Water Filter FigureDescription of Refrigerator FeaturesDescription of appliance and equipment Figure Description of FreezerAppliance Temperature and control displayOperating and Control Elements , Figure Operating icons Control iconsTo increase the temperature Setting the Temperature FigureTo reduce the temperature OperationAudible alarm signal Figure Temperature Display FigurePower Failure/Frost-Control How to activate the setup mode Exit setup modeHow to deactivate the Sabbath Mode = Sabbath ModeHow to activate the Sabbath Mode How to activate the door gasket heatingHow to change the temperature display to degrees Celsius Setup Mode Figure= Temperature display mode How to adjust the water quantityHow to activate the childproof lock = Drop symbol resetHow to reset the drop symbol How to deactivate the childproof lockArranging Food Figure Shelf Arrangement To install the vegetable drawerRefrigerator Compartment Repositioning the door racks FigureRepositioning the shelves Figure Interior LightRemoving the shelves Figure Freezer compartment description Freezer CompartmentFreezing capacity Figure Freezing with Superfrost Figure Freezing and StorageTo Start the Ice Maker Safety InstructionsIcemaker To turn the Ice Maker onIce Maker at vacations How to activate the Ice Maker VacationState Cleaning CleaningDefrosting DEFROSTING/VACATIONVacation Tips Troubleshooting Problem Possible Cause and RemedyService Number 2 and Appliance / serial number IceMaker TroubleshootingCustomer Service Figure Appliance InformationWarranty Liebherr Warranty Plan

CS 7081411-00, HCS 7081411-00, HC 7081411-00 specifications

The Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are advanced construction and material handling equipment that exemplify the latest in engineering and technological innovation. These components are part of Liebherr's renowned line of machinery, recognized for their exceptional performance, reliability, and efficiency.

One of the main features of these models is their robust build quality. Designed to withstand demanding environments, the HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are constructed from high-strength materials that ensure durability. This resilience gives operators peace of mind when dealing with heavy loads or harsh working conditions. The engineering behind these models also includes precision and attention to detail, allowing for seamless operation across various job sites.

These models incorporate state-of-the-art technologies that enhance productivity and operational efficiency. For instance, they are equipped with advanced hydraulic systems that provide smooth and responsive load handling capabilities. This allows operators to perform tasks with precision, minimizing the time spent on each job and increasing overall productivity. Additionally, the integrated control systems offer user-friendly interfaces that simplify operation, making it easier for both experienced operators and newcomers.

Another key characteristic of the Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 is their versatility. These models can be configured for a wide range of applications, from construction to logistics, thanks to their modular design and adaptability. This flexibility allows companies to use the same piece of equipment across different projects, making it a cost-effective solution for businesses looking to optimize their operations.

Moreover, Liebherr places significant emphasis on safety, and these models are no exception. They come with several safety features designed to protect both the operator and the surrounding environment. These include robust stabilization systems, automatic shut-off mechanisms, and ergonomic controls that facilitate safe and efficient operation.

In summary, the Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are exemplary pieces of machinery in the construction and material handling sectors. With their robust build quality, advanced technologies, versatility, and commitment to safety, these models are designed to meet the diverse needs of modern industries while enhancing productivity and operational excellence. Whether used for heavy lifting, logistical applications, or construction tasks, they represent a trusted and reliable choice for professionals in the field.
Top Page Image Contents