Liebherr CS 7081411-00, HC 7081411-00 manual Icemaker, Safety Instructions, To Start the Ice Maker

Page 20

ICEMAKER

Safety Instructions and

Warnings

•The ice maker is designed exclusively to make ice cubes in quantities needed by a household and may only be operated with water appropri- ate for this purpose.

•All repairs and work on the ice maker may only be done by customer service personnel or other appropriately trained personnel.

•Do not consume or use the first three batches of ice. This applies both to using the appliance for the first time and also using it after it has not been used for a long period of time.

•The manufacturer cannot accept liability for damage caused by equipment or water lines between the solenoid valve and the water supply.

•The ice maker will only work if the combined refrigerator-freezer is connected to the electrical outlet. It will only make ice cubes if the freezer compartment is operating.

•The ice maker can only make ice cubes if the upper freezer drawer is completely closed and the ice cube bin is installed correctly (Figure 20).

Ice maker

Ice cube bin

Figure 20

To Start the Ice Maker

To turn the Ice Maker on

•Touch the Ice Maker icon so the Ice Maker LED comes on (Figure 23).

After you start the ice maker for the first time it may take up to 24 hours before the first ice cubes are ready.

Note

The first three batches of ice must not be consumed or used.

The production capacity depends on the tempera- ture inside the freezer compartment. The lower the temperature, the more ice can be produced over a period of time.

The ice cubes fall out of the ice maker into the Ice cube bin (Figure 20). When the ice reaches a cer- tain level in the bin, the appliance stops producing ice automatically.

To turn the Ice Maker off

If you do not need any ice cubes, the ice maker can be turned off independently of the freezer com- partment.

•Touch the Ice Maker icon so the Ice Maker LED goes out.

Note

The ice maker can also be turned on and off by pressing the “ON/OFF” button at the ice maker housing for approximately 1 second (Figure 21).

Figure 21

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Use and Care Manual Additional benefits Table of Contents Safety Electrical SafetyPlease read and follow these instructions Disposal of Old ApplianceImportant Safety Information Safety Regulations Disposal of CartonInstalling the Water Filter Water FilterWater Filter Figure Removing the Water Filter FigureFeatures Description of appliance and equipment FigureDescription of Refrigerator Description of FreezerTemperature and control display Operating and Control Elements , FigureAppliance Operating icons Control iconsSetting the Temperature Figure To reduce the temperatureTo increase the temperature OperationPower Failure/Frost-Control Temperature Display FigureAudible alarm signal Figure How to activate the setup mode Exit setup mode= Sabbath Mode How to activate the Sabbath ModeHow to deactivate the Sabbath Mode How to activate the door gasket heatingSetup Mode Figure = Temperature display modeHow to change the temperature display to degrees Celsius How to adjust the water quantity= Drop symbol reset How to reset the drop symbolHow to activate the childproof lock How to deactivate the childproof lockTo install the vegetable drawer Refrigerator CompartmentArranging Food Figure Shelf Arrangement Repositioning the door racks FigureRemoving the shelves Figure Interior LightRepositioning the shelves Figure Freezing capacity Figure Freezer CompartmentFreezer compartment description Freezing with Superfrost Figure Freezing and StorageSafety Instructions IcemakerTo Start the Ice Maker To turn the Ice Maker onState How to activate the Ice Maker VacationIce Maker at vacations Cleaning CleaningVacation Tips DEFROSTING/VACATIONDefrosting Troubleshooting Problem Possible Cause and RemedyIceMaker Troubleshooting Customer Service FigureService Number 2 and Appliance / serial number Appliance InformationWarranty Liebherr Warranty Plan

CS 7081411-00, HCS 7081411-00, HC 7081411-00 specifications

The Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are advanced construction and material handling equipment that exemplify the latest in engineering and technological innovation. These components are part of Liebherr's renowned line of machinery, recognized for their exceptional performance, reliability, and efficiency.

One of the main features of these models is their robust build quality. Designed to withstand demanding environments, the HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are constructed from high-strength materials that ensure durability. This resilience gives operators peace of mind when dealing with heavy loads or harsh working conditions. The engineering behind these models also includes precision and attention to detail, allowing for seamless operation across various job sites.

These models incorporate state-of-the-art technologies that enhance productivity and operational efficiency. For instance, they are equipped with advanced hydraulic systems that provide smooth and responsive load handling capabilities. This allows operators to perform tasks with precision, minimizing the time spent on each job and increasing overall productivity. Additionally, the integrated control systems offer user-friendly interfaces that simplify operation, making it easier for both experienced operators and newcomers.

Another key characteristic of the Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 is their versatility. These models can be configured for a wide range of applications, from construction to logistics, thanks to their modular design and adaptability. This flexibility allows companies to use the same piece of equipment across different projects, making it a cost-effective solution for businesses looking to optimize their operations.

Moreover, Liebherr places significant emphasis on safety, and these models are no exception. They come with several safety features designed to protect both the operator and the surrounding environment. These include robust stabilization systems, automatic shut-off mechanisms, and ergonomic controls that facilitate safe and efficient operation.

In summary, the Liebherr HC 7081411-00, HCS 7081411-00, and CS 7081411-00 are exemplary pieces of machinery in the construction and material handling sectors. With their robust build quality, advanced technologies, versatility, and commitment to safety, these models are designed to meet the diverse needs of modern industries while enhancing productivity and operational excellence. Whether used for heavy lifting, logistical applications, or construction tasks, they represent a trusted and reliable choice for professionals in the field.
Top Page Image Contents