Liebherr HC1050 Water Connection For IceMaker Models Only Figure, Connection to the Water Supply

Page 17

INSTALLATION

Water Connection For IceMaker Models Only - Figure 11

!WARNING

ELECTRICAL SHOCK HAZARD!

•Disconnect the water supply before connecting the water lines for the IceMaker. Make sure the refrigerator is not plugged in and there is no electric power going to the refrigerator.

•Failure to follow these instructions could result in death or serious injury.

●The water pressure must be between 21.8-87.0 psi (1.5-6 bar).

●Use a 1/4 in. OD copper line to connect the water supply to the solenoid valve. This is not supplied with the refrigerator (Figure 11).

●A shut-off valve, such as the saddle valve illustrated here, must be installed between the hose line and the main water supply so the water supply can be stopped if necessary.

Do not install the shut-off valve behind the refrigeration unit.

Connection to the Water Supply -

Figures 12, 13

1.Install the shut-off valve, water filter and automatic shut-off device as required.

Note

The solenoid valve is located at the rear of your refrigerator-freezer.

2.The 1/4 in. copper tubing between the shut- off valve and solenoid valve has a 3/4 in. male connector (Fig. 13, 2). Make sure there is approximately 30 in. (70 cm) of excess tubing behind the refrigerator-freezer for easy connection.

Note

A 3/4 in. to a 1/4 in. adapter and cable clip are supplied with the IceMaker.

3.Remove the cover cap (Fig. 13, 4) from the solenoid valve (Fig. 13, 1). Install the brass adapter (Fig. 13, 2) with sealing ring (Fig. 13, 6) on the solenoid valve (Fig. 13, 1). Attach the copper tube to the brass adapter (Fig. 13, 2). Secure the copper tube (Fig. 13, 3) to the appliance using the cable clip (Fig. 13, 5).

4.Open the shut-off valve for the water supply and check the entire water system for leaks. Before the appliance is used for the first time, a licensed plumber should bleed air from the system.

5.Insert the electrical plug for the appliance into the electrical outlet (Figure 12).

6.Move the combined refrigerator-freezer into final position in the cabinet.

Figure 11

 

● If you have hard water, we recommend you

 

install a water softener. Also, a fi lter must be

 

installed if the water contains solids such as

 

sand.

 

● All equipment and devices used to supply the

 

water to the appliance must comply with the

Figure 12

current regulations for your geographical area.

A delight in freshness

HC 1001 / HC 1050

11

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Use Care Installation Manual Additional benefits Please Read and Follow These Instructions Delight in freshness Delight in freshness Features Table of Contents Area Requirements Installation GuidelinesElectrical Requirement Customer’s ResponsibilityDisposal of Old Appliance Important Safety InformationElectrical Safety Installation GuidlinesExamining Loose Parts Figure UnpackingDisposal of Carton Kitchen Cabinet Airflow InstallationKitchen Cabinet Construction Ure Construction of Kitchen Cabinet FigureInstallation Designing the Kitchen Cabinet Doors Reversing Door Hinges Figure Connection to the Water Supply Water Connection For IceMaker Models Only FigureInstallation Installation Are flush with the front edge Secure the appliance into the kitchen cabinet Installation Installation = thickness of kitchen cabinet wall + 1/8 in mm Attaching the KitchenOperation Safety RegulationsTurning the Appliance on Press the ON/OFF Buttons , 3 or 9 so thatTo reduce the temperature Setting the Temperature FigureTo increase the temperature Childproof Lock FigureTemperature Display Figure Changing the Temperature DisplayTo change the temperature display Display Brightness FigureAudible / visual temperature alarm Power Failure / FrostControlAudible door alarm Cooling with Fan Figure SuperCooling FigureRefrigerator Compartment Adjusting the bottle holderArranging Food Figure Shelf ArrangementRepositioning the shelves Figure Interior LightIf you need space for large bottles and containers Figure Replacing the bulbFreezing and Storage Freezer CompartmentSuperFrost Figure Thawing StorageInformation System Figure Freezer Tray FigureCold-storage Accumulators Making Ice Cubes FigureTo turn on To Start the IceMaker FigureTo turn OFF To make ice cubesTo Clean the IceMaker Figure Cleaning DEFROSTING/CLEANINGEnergy Saving Tips Refrigerator compartmentFailure/FrostControl Display TroubleshootingProblem Possible Cause and Remedy Appliance Information Customer Service FigureDelight in freshness W . l i e b h e r r a p p l i a n c e s . c o m

HC1050, HC1001 specifications

The Liebherr HC1001 and HC1050 represent a significant advancement in heavy construction equipment, particularly in the realm of crawler cranes. These machines are engineered to deliver exceptional performance, reliability, and operational efficiency, ensuring they meet the diverse needs of modern construction sites.

The Liebherr HC1001 is characterized by its robust lifting capacity and compact design, making it an ideal choice for applications in tight spaces where maneuverability is crucial. With a maximum lifting capacity of 100 tons, the HC1001 can handle a variety of loads with ease. This crane is equipped with a powerful diesel engine that provides ample power for lifting and hoisting, yet maintains fuel efficiency. Its optimized hydraulic system enhances performance while reducing operational costs.

The HC1050, on the other hand, steps up the game with a maximum lifting capacity of 120 tons. This model features innovative technologies that further improve productivity and safety on job sites. The HC1050 incorporates a state-of-the-art control system that provides real-time data to the operator, allowing for precise maneuvering and load management, reducing the likelihood of accidents during operation.

Both models feature Liebherr's advanced Luffing Jib technology, which enables them to work at variable angles, adjusting to different site requirements without compromising stability. This feature is particularly advantageous in urban construction settings where space is limited. The luffing jib also allows for higher lift heights and an extended reach, making these cranes versatile tools for a wide range of construction tasks.

Safety is paramount in Liebherr’s crane designs, and both the HC1001 and HC1050 come equipped with multiple fail-safes and monitoring systems. These systems provide alerts for overloads and operational limits, ensuring that operators can work confidently within designated safety parameters.

In terms of maintenance, Liebherr has designed these cranes with easy access to key components, simplifying routine inspections and servicing. This focus on maintenance means that downtime is minimized, allowing for continued productivity on job sites.

In conclusion, the Liebherr HC1001 and HC1050 crawler cranes combine impressive lifting capabilities with innovative technologies, making them suitable choices for modern construction challenges. Their advanced features, safety systems, and ease of maintenance position them as reliable heavy equipment for contractors aiming to enhance efficiency and safety in their operations. Whether for urban projects or expansive construction sites, Liebherr's commitment to quality and performance shines through in these models.
Top Page Image Contents