Changing the Temperature Display

OPERATION

The temperature reading can be displayed in either degrees Fahrenheit or degrees Celsius.

When the appliance is first turned on or after a power failure, the refrigerator Temperature Display and Setting Display (Fig. 1, 7) will show the set temperature display, either degrees Fahrenheit or degrees Celsius, for five seconds. Then, the actual temperature is displayed.

To change the temperature display:

1.First press and hold the Alarm Button (Fig. 1, 5) and then aditionally the Down

Refrigerator Temperature Button (Fig. 1, 8) for seven seconds. The set temperature display will blink six times.

2.While the temperature display is blinking, hold the Alarm Button and use the Down Refrigerator Temperature Button to change the temperature display.

3.After making the change, the new temperature display will blink six times. Then both temperature displays will show the actual temperature value.

Temperature Display - Figure 1

In normal operation, the following settings will be displayed:

●The average refrigerator temperature in

display (Fig. 1, 7)

●The warmest frozen food temperature in display (Fig. 1, 1).

When starting up for the first time or when the appliance is warm, dashes will appear until the temperature reaches a level that can be displayed; 32°F to 60°F (0°C to 19°C) in the refrigerator and below 32°F (0°C) in the freezer.

It will take between three and eight hours for the required temperature, 0°F or 41°F (-18°C or 5°C), to be reached and displayed permanently in the display, depending on the ambient conditions and the temperature setting.

The display will “flash:”

●If you change the temperature or

●If the temperature rises by several degrees, indicating cold loss, e.g. if you place fresh, “warm” food in the freezer or if you remove or repack frozen food, the temperature may rise for a short time due to warm air flowing into the freezer. Once you have finished loading or repacking, the electronics will automatically reset the temperature to the most recent setting. Short-term rises in temperature will not affect the frozen food.

If “F0” to “F5” appears in the display, the appliance has a fault. Have the fault number available when you contact the customer service department. See Customer Service.

Display Brightness - Figure 1

Your appliance is delivered with the display brightness set to low.

When the door is opened or the temperature settings are changed, the display automatically switches to bright for one minute, or as long as the alarm state lasts.You can change the brightness if required.

●To make display brighter: Keep the Alarm Button pressed while simultaneously pressing the Up Freezer Temperature Button

(Fig. 1, 2).

●To make display darker: Keep the Alarm Button pressed while simultaneously pressing the Down Freezer Temperature Button (Fig. 1, 2).

A delight in freshness

HC 1001 / HC 1050

HC1050, HC1001 specifications

The Liebherr HC1001 and HC1050 represent a significant advancement in heavy construction equipment, particularly in the realm of crawler cranes. These machines are engineered to deliver exceptional performance, reliability, and operational efficiency, ensuring they meet the diverse needs of modern construction sites.

The Liebherr HC1001 is characterized by its robust lifting capacity and compact design, making it an ideal choice for applications in tight spaces where maneuverability is crucial. With a maximum lifting capacity of 100 tons, the HC1001 can handle a variety of loads with ease. This crane is equipped with a powerful diesel engine that provides ample power for lifting and hoisting, yet maintains fuel efficiency. Its optimized hydraulic system enhances performance while reducing operational costs.

The HC1050, on the other hand, steps up the game with a maximum lifting capacity of 120 tons. This model features innovative technologies that further improve productivity and safety on job sites. The HC1050 incorporates a state-of-the-art control system that provides real-time data to the operator, allowing for precise maneuvering and load management, reducing the likelihood of accidents during operation.

Both models feature Liebherr's advanced Luffing Jib technology, which enables them to work at variable angles, adjusting to different site requirements without compromising stability. This feature is particularly advantageous in urban construction settings where space is limited. The luffing jib also allows for higher lift heights and an extended reach, making these cranes versatile tools for a wide range of construction tasks.

Safety is paramount in Liebherr’s crane designs, and both the HC1001 and HC1050 come equipped with multiple fail-safes and monitoring systems. These systems provide alerts for overloads and operational limits, ensuring that operators can work confidently within designated safety parameters.

In terms of maintenance, Liebherr has designed these cranes with easy access to key components, simplifying routine inspections and servicing. This focus on maintenance means that downtime is minimized, allowing for continued productivity on job sites.

In conclusion, the Liebherr HC1001 and HC1050 crawler cranes combine impressive lifting capabilities with innovative technologies, making them suitable choices for modern construction challenges. Their advanced features, safety systems, and ease of maintenance position them as reliable heavy equipment for contractors aiming to enhance efficiency and safety in their operations. Whether for urban projects or expansive construction sites, Liebherr's commitment to quality and performance shines through in these models.