Troubleshooting
Problem | Possible Cause | Correction | |
every 15 |
|
|
|
seconds*. |
|
|
|
Noises are too | The different speed levels of speed- | u These noises are normal. | |
loud. | controlled* compressors can cause |
|
|
| them to generate various noises |
|
|
| during operation. |
|
|
A gurgling | This sound comes from the refrig- | u The sound is normal. | |
sound | erant flowing in the refrigeration |
|
|
| circuit. |
|
|
A faint clicking | The sound always occurs when the | u The sound is normal. | |
sound | refrigeration unit (the motor) auto- |
|
|
| matically switches on or off. |
|
|
A hum. It is | The refrigeration increases automati- | u The sound is normal. | |
briefly a little | cally when the SuperFrost function is |
|
|
louder when the | activated, fresh food has just been |
|
|
refrigeration unit | placed in the appliance or the door |
|
|
(the motor) | has been left open for a while. |
|
|
switches on. | The ambient temperature is too high. | u Solution: (see 1.3) | |
Flow noise on | The sound is caused by the soft stop | u The sound is normal. | |
the soft stop | mechanism. |
|
|
mechanism. |
|
|
|
The temperature | There is a fault. | u | Contact the customer service department (see Main- |
display indi- |
|
| tenance). |
cates: F0 to F9. |
|
|
|
The temperature | There is a fault. | u | Contact the customer service department (see Main- |
display reads: FE |
|
| tenance). |
The temperature | The freezer temperature rose too | u To delete the display of the warmest temperature: | |
display shows a | high during the last hours or days |
| Press the Alarm button Fig. 2 (10). |
flashing power | due to power failure or power inter- | u Check the quality of the food. Do not consume | |
failure symbol | ruption. When the power interruption |
| spoiled food. Do not |
. The | is over, the appliance will continue to |
|
|
operate at the last temperature |
|
| |
warmest temper- |
|
| |
ature reached | setting. |
|
|
during the |
|
|
|
power failure is |
|
|
|
displayed in the |
|
|
|
temperature |
|
|
|
display. |
|
|
|
DEMO lights up | The demo mode is activated. | u | Contact the customer service department (see Main- |
in the tempera- |
|
| tenance). |
ture display. |
|
|
|
The Filter Symbol | The water filter should be replaced. | u Replace the water filter (see Maintenance). | |
Fig. 2 (5) lights |
|
|
|
up. |
|
|
|
The outside | The heat of the refrigerant circuit is | u This is normal. | |
surfaces of the | used to prevent condensate from |
|
|
| forming. |
|
|
14 | * Depending on model and options |
|