Controls and displays
tive measures, e. g. use gloves. Do not consume ice cream (especially sherbets) and ice cubes immediately when they are too cold.
Risk of injury and damage:
-Hot steam may lead to injuries. Do not use any electrical heating or steam cleaning equip- ment, naked flames or defrosting sprays for defrosting
-Do not remove ice with sharp objects
Risk of crushing
-Do not reach into the soft stop mechanism. Fingers may be trapped when the door is closed.
Follow the specific instructions in the other sections:
| DANGER | indicates a hazardous situation, |
|
| which if not avoided, will result in |
|
| death or serious injury. |
| WARNING | indicates a hazardous situation, |
|
| which if not avoided, could result in |
|
| death or serious injury. |
| CAUTION | indicates a hazardous situation, |
|
| which if not avoided, will result in |
|
| minor or moderate injury. |
| NOTICE | indicates a hazardous situation, |
|
| which if not avoided, could result in |
|
| damage to property. |
|
|
|
| Note | indicates useful advice and tips. |
3 Controls and displays
3.1 Operating and control elements
Fig. 2 | (8) | On/Off button | |
(1) | Up button | ||
(2) | Down button | (9) | SuperFrost button |
(3) | Menu symbol | (10)Alarm button | |
(4)Alarm symbol
(5)Filter symbol(12)Sabbath Mode symbol
(6)IceMaker symbol (13)Child safety symbol
(7)SuperFrost symbol (14)Temperature display(11)Power failure symbol
The exact contact point is between the symbol and its label
3.2 Temperature display
The following is displayed in normal operation: - the highest freezer temperature
The temperature display:is flashing:
-the temperature setting has been changed
-after
-the temperature has risen by several degrees
Dashes are shown on the display:
- the freezer temperature is above 32 °F (0 °C).
The following displays indicate malfunction. Possible causes and corrective actions: (see Troubleshooting).
-F0 through F9
-FE
-The power failure symbol 
flashes.
4Start-up
4.1Transporting the appliance
CAUTION
Risk of injury or damage if incorrectly transported. u Transport the appliance in its packaging.
u Transport the appliance upright.
u Do not move the appliance on your own.
4.2 Setting up the appliance
WARNING
Risk of fire due to moisture!
If live parts or the power cord get wet, this can cause a short circuit.
u The appliance is designed for use in enclosed spaces. Do not operate the appliance in open space or in damp areas or where there is spray.
u Only operate the appliance after it has been installed.
WARNING
Risk of fire due to short circuit.
If the power cable or plug of the appliance or another appliance and the back of the appliance touch each other the power cable or plug will be damaged by the vibrations of the appliance which could lead to a short circuit.
u Install the appliance so that it does not touch any plugs or power cables.
u Do not connect the appliance or other appliances to the sockets on the back of the appliance.
|
|
|
* Depending on model and options | 5 | |