Liebherr 7085638-01 Putting into operation, Temperature display, Transporting the appliance

Page 5

Putting into operation

(3)Temperature display

3.2 Temperature display

The following are displayed in normal operation:

-the set cooling temperature

4 Putting into operation

4.1 Transporting the appliance

CAUTION

Risk of injury and danger of damage as a result of incorrect transport!

u Transport the appliance in a packed condition. u Transport the appliance upright.

u Do not transport the appliance without assistance.

4.2 Installing the appliance

WARNING

Fire hazard due to dampness!

If live parts or the mains lead become damp this may cause short circuits.

u The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.

WARNING

Risk of fire due to short circuit!

If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit.

u Stand the appliance so that it is not touched by connectors or main cables.

u Do not plug the appliance or any others into sockets located near the rear of the appliance.

WARNING

Fire hazard due to refrigerant!

The refrigerant R 600a is environmentally friendly but flam- mable. Escaping refrigerant may ignite.

u Do not damage the piping of the refrigeration circuit.

WARNING

Fire hazard and danger of damage!

u Do not place appliances emitting heat e.g. microwaves, toasters etc. on the appliance!

WARNING

Blocked ventilation openings pose a risk of fire and damage! u Always keep the ventilation openings clear. Always ensure

that the appliance is properly ventilated!

NOTICE

Risk of damage due to condensate!

If your appliance is not a Side-by-Side (SBS) appliance:

u do not install the appliance directly alongside a further refrig- erator/freezer.

q In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains.

q The floor at the site must be flat and level.

q Do not install the appliance in a location where it is exposed to direct radiation of the sun, next to a cooker, heater and similar.

q Always stand the appliance backed directly to the wall using the enclosed wall spacers (see below).

q The appliance may be moved only when it is empty. q Do not install the appliance without assistance.

q The more R 600a refrigerant there is in the appliance, the larger the room in which the appliance is standing needs to be. In rooms that are too small, a flammable mix of gas and air may be created if there is a leak. According to the EN 378 standard, every 11 g of R 600a refrigerant requires at least 1 m3 space in the room for the appliance. The amount of refrigerant in your appliance is on the type plate inside the appliance.

u Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because other- wise there will be vibratory noise!

u Remove the protective film from the outside of the appli- ance.*

NOTICE*

The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompa- nying care product.

Otherwise the surface coating will be affected.

u Wipe the coated door surfaces using a soft, clean cloth only.

u Apply a stainless steel cleaner only to the stainless steel side walls evenly, wiping with the grain. Subsequent cleaning becomes easier as a result.

u Wipe side walls with a paint finish using a soft, clean cloth only.

uRemove the protective film from the decorative trims.*

uRemove all transit supports.

The spacers supplied with some appliances must be used to achieve the stated energy consumption. These will extend the depth of the appliance by approx. 35 mm. The appliance is fully functional if the spacers are not used, but does have a slightly higher energy consumption.

u In the case of an appliance with enclosed wall spacers, mount the wall spacers on the back of the appliance at the top left and right.

uDispose of packaging material (see 4.5) .

* Depending on model and options

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents KP/ KPesf/ SKes/ SKesf 130614 7085638Appliance at a glance ContentsAppliance at a glance General safety information General safety informationExternal dimensions of the appli- ance ConformityControls and displays Controls and displaysOperating and control elements Fire hazardInstalling the appliance Temperature displayPutting into operation Putting into operationChanging the bearing parts Changing over the door hingesDetaching the door Disposing of packaging Insertion into a row of kitchen unitsFitting the door Aligning the doorControl ControlShelves Using the sectioned shelfDoor racks Removing the bottle holderMalfunction MaintenanceMaintenance Taking the appliance out of service Switching off the applianceDecommissioning Decommissioning

7085638-01 specifications

The Liebherr 7085638-01 is an advanced component that exemplifies the company’s commitment to innovation and quality in the field of industrial machinery. Liebherr, a global leader in construction equipment and mobile cranes, has engineered this component with a focus on reliability, efficiency, and performance.

One of the main features of the Liebherr 7085638-01 is its robust construction. Designed to withstand the rigors of heavy-duty applications, it offers superior durability and longevity, making it an ideal choice for various construction and industrial operations. This component is crafted using high-quality materials that enhance its resistance to wear and tear, ensuring optimal performance over extended periods.

In terms of technology, the Liebherr 7085638-01 incorporates state-of-the-art engineering advancements. It employs precision manufacturing techniques that guarantee consistent quality and performance. The incorporation of advanced electronic systems allows for enhanced functionality, providing users with greater control and automation capabilities. This integration reduces operational costs and minimizes downtime, which is a critical factor in maintaining productivity on job sites.

The Liebherr 7085638-01 is known for its efficient energy consumption. It utilizes sophisticated mechanisms that optimize power usage, leading to reduced fuel consumption and lower emissions. This focus on environmental sustainability aligns with global trends toward greener construction practices, making the component a responsible choice for modern applications.

Another significant characteristic is its compatibility with a wide range of Liebherr machinery. The versatile design allows for easy integration into various models, providing users with flexibility in equipment selection. This interoperability enhances operational efficiency, as users can seamlessly transition between different machines without the need for extensive modifications.

Furthermore, the Liebherr 7085638-01 comes with comprehensive support services. Liebherr’s dedication to customer satisfaction includes providing technical assistance, maintenance guidance, and readily available spare parts. This commitment ensures that users can keep their equipment running smoothly, thus maximizing uptime and operational efficiency.

In conclusion, the Liebherr 7085638-01 is a standout component in the realm of industrial machinery, showcasing exceptional durability, cutting-edge technology, energy efficiency, versatility, and unparalleled customer support. Its design and features make it an optimal choice for construction professionals seeking reliable and high-performing equipment.
Top Page Image Contents