Levelling the appliance

1.Adjust the height of the appliance at the front by twisting the adjustable

feet 1 (A/F 27). Use the open-ended spanner provided.

Caution!

The front feet of the ap- pliance must be firmly placed on the floor.

2. Adjusttheheightoftheappliance attherearbyturningtheadjusting bars 2.

Turn the adjusting bars clock- wiseuntilthecompressormount- ing plate touches the anti-tipping bracket.

Fasten the appliance in the recess

Fasten the appliance in the recess through the upper and lower hinges of the refrigerator doors.

Use 2 screws for each hinge.

screws

(4 x 16 mm)

Adjusting the front of the drawer

If required, the front of the freezer drawers can be adjusted. Transfer the screws shown in the illustration (on the left and right sides of the freezer drawer) individually to the long slots below. Tighten the screws in the front of the drawer once it is in the right position.

Side view of the freezer drawer pulled out