Liebherr 120309 7084442 - 00 installation instructions Control

Control

5 Control

5.1 Saving energy

uAlways pay attention to good ventilation.

uKeep the time the appliance is open to a minimum.

uStore food logically.

uFirst cool warm food to room temperature before storing it . Accumulated dust increases the energy con-

sumption:

uOnce a year, dust the refrigerating unit to- gether with the metal grille of the heat ex- changer at the back of the appliance.

5.2Brightness of the temperature dis- play

You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed.

5.2.1 Adjusting the brightness

The brightness is adjustable between h0 (no illumination) and h5 (maximum luminosity).

u To activate the setting mode: press SuperCool button Fig. 3 (2) for about 5s.

w The display indicates c.

w The menu symbol Fig. 3 (5) shines.

u Using the Up setting button Fig. 3 (7) and Down setting but- ton Fig. 3 (6), select h.

u To confirm: briefly press the SuperCool button Fig. 3 (2).

u To set the display brighter: press the Up set- ting button Fig. 3 (7).

u To set the display darker: press the Down setting button Fig. 3 (6).

u To confirm: briefly press the SuperCool but- ton Fig. 3 (2).

w The brightness is adjusted to the new value.

u To deactivate the setting mode: press the On/Off button Fig. 3 (3).

-or-

u Wait for 5 minutes.

wThe temperature is indicated again in the temperature display.

5.3 Child proofing

The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children.

5.3.1 Setting the child lock function

u To activate the setting mode: press SuperCool button Fig. 3 (2) for about 5 s.

w The display indicates c.

w The menu symbol Fig. 3 (5) shines.

u Briefly press theSuperCool button Fig. 3 (2) to confirm. When c1 is indicated in the display:

u to activate the child lock, briefly press the Su- perCool button Fig. 3 (2).

wThe child lock symbol Fig. 3 (11) shines. c flashes in the dis-

play.

When c0 is indicated in the display:

uto deactivate the child lock, briefly press the SuperCool but- ton Fig. 3 (2).

w The child lock symbol Fig. 3 (11) goes out. c flashes in the display.

u To deactivate the set-up mode: press On/Off button Fig. 3 (3).

-or-

u Wait for 5 minutes.

wThe temperature is indicated again in the temperature display.

5.4 Door alarm

If the door is open longer then 60 s, the audible alarm sounds. The audible alarm is automatically silenced when the door is closed.

5.4.1 Muting the door alarm

The audible alarm can be muted when the door is open. The sound switch-off function is active as long as the door is left open. u Press alarm button Fig. 3 (1).

w The door alarm is silenced.

5.5 Food refrigeration

Note

The energy consumption increases and the cooling performance decreases if the ventilation is inadequate.

u Always keep the air slits of the fan free.

u Store perishable food such as ready-to-serve dishes, meat products and sausages in the coldest zone. Place butter, eggs and preserves in the upper area and in the door (see Appli- ance at a glance).

u Use recyclable plastic, metal, aluminium and glass containers and cling film for wrapping.

u Use the front area of the refrigerator compartment floor only for briefly putting down cooled products, e.g. when rearrang- ing and sorting. However do not leave cooled products there otherwise they may be pushed back or tipped over when the door is closed.

u Do not store food too close together to enable good air circu- lation.

u To safeguard bottles from tipping over: move the bottle holder.

5.6Setting the temperature in the refrig- erator compartment

The temperature can be set from 9 °C to 2 °C, the recommended temperature is 5 °C.

u For a higher temperature setting: press Up button Fig. 3 (7).

u For a lower temperature setting: press Down button Fig. 3 (6).

w The first time the button is pressed, the value set so far is in- dicated in the temperature display.

u To change the temperature in 1 °C steps: briefly press the button.

u To change the temperature continuously: hold down the but- ton.

w The value is displayed flashing during the setting operation. w The actual temperature is displayed about 5 s after the last

press of a button. The temperature slowly adjusts to the new value.

5.7 SuperCool

With SuperCool you switch to the highest cooling performance to reach lower cooling temperatures. Use SuperCool, to rapidly cool large amounts of food.

The SuperCool function uses slightly more energy.

7