Rangemaster U109941 - 02 manual  The door is heavy, so take care, To Adjust an Oven Door Angle

Page 26

WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON

Disconnect from electricity before servicing. Check appliance is safe when you have finished.

 

9.

To Replace an Oven Door

Fig.8-3

Fig.8-4

Open the oven door. Support the door and remove the two

 

 

 

 

screws securing the upper hinge and gasket to the cooker

 

 

front (Fig.8-3).Remove the door from the lower hinge by

 

 

lifting slightly and moving outwards (Fig.8-4).

 

�

The door is heavy, so take care.

�

Reassemble in reverse order.

ArtNo.320-0001 Door hinges

ArtNo.320-0001 Door hinge 10.

To Adjust an Oven Door Angle

Fig.8-5

ArtNo.320-0006 Oven door hinge adjustment 1

Effect of hinge adjustment - exagerrated for clarity

The bottom hinge of either oven door can be adjusted to alter the angle of the door (Fig.8-5). Loosen the bottom hinge fixing screws and use the notch and a flat bladed screwdriver to move the position of the hinge to set the hinge position (Fig.8-6).

Retighten the hinge screws.

11.To Replace the Main Oven Door Outer Panel

Move the cooker forward to gain access to the sides.

Open the oven door slightly and remove the front panel fixing screws from the door sides – two each side (Fig.8-7).

Carefully lift off the outer door panel.

Fig.8-6

Centreline of hinge pin

ArtNo.320-0007 Oven door hinge adjustment 2

Oven door omitted for clarity

Fig.8-7

ArtNo.320-0002a Proplus oven door side screws

Fig.8-8

�

ArtNo.320-0003 Oven door latch

Remove the door handle from the panel by unscrewing the two retaining nuts. Fit the door handle to the new panel.

Fit the panel to the door. Reassemble in reverse order.

12.To Replace the Tall Oven Door Outer Panel

Remove the oven door (see 9). Lay the door face down on a suitable surface and remove the two screws from the bottom edge of the door and the two screws from the inside face of the door.

Remove the outer door panel. Remove the handle by unscrewing the two screws.

Unscrew the two cross-headed screws holding the door handle fixing bracket to the door panel. Fit the door handle bracket and door handle to the new panel.

Fit the panel to the door and reassemble in the reverse order.

13.To Change the Main Oven Door Latch

Remove the outer door panel (see 11). Remove screws ‘B’ that hold the latch assembly to the inner door panel (Fig.8-8). Fit the new catch and reassemble in reverse order.

Verify the door operation.

14.To Adjust the Main Oven Door Catch Keep

Open the oven door, and slacken off the locknut at the base of the keep (Fig.8-9).

Screw in or out as required until the required fit is obtained. Retighten the locking nut.

15.To Replace the Tall oven Magnetic Latch

Remove the control panel (see 1). Remove the plinth

(3 screws) and the central vertical cover (5 screws). Prise the retaining clip off the magnet unit.

Fit the new unit and retaining clip, and reassemble in reverse order. Check that the door operates correctly.

24

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Professional + Contents Personal Safety SafetyInstallation and Maintenance Peculiar SmellsCooker Care CleaningHob Care  do not use the hob surface as a cutting boardCooker Overview HobAutomatic Heat-up, a Residual Heat Indicator, HPan Detector Boil Dry Function Glide-out GrillChild Lock, L  Never close the grill door when the grill is on OvensClock Setting the time of dayTo start and then stop the left-hand oven using the Timer Minute MinderAuto is showing, but you want to revert to manual cooking Key LockOven shelves Right-hand Tall Oven AccessoriesOven Shelves Left-hand Main Oven Handyrack Main OvenMain Oven Light General Oven Tips Tips on Cooking with the TimerCooking Tips Fan Oven Cooking Table MeatCleaning Burned-on Spills Cleaning Your CookerCleaning Spills Daily CareControl Panel and Doors Door Panel ‘Cook & Clean’ PanelsRemoving the Panels to clean the Enamel Interior Tall OvenTroubleshooting Oven not coming on Oven temperature getting hotter as the cooker gets olderOven is not cooking evenly An oven light is not workingSafety Requirements InstallationDear Installer Provision of VentilationMoving the Cooker Positioning the CookerUnpacking the Cooker Levelling Completing the MoveRepositioning the Cooker following Connection Lower the Two Rear RollersGrill Check Electrical ConnectionHob Check Oven CheckTo Lift up the Ceramic Hob ServicingTo Remove a Side Panel To Replace a Hob ElementTo Replace the Grill Controller To Remove the Electronic TimerTo Replace a Thermostat  The door is heavy, so take care To Adjust an Oven Door AngleTo Adjust the Main Oven Door Catch Keep To Replace the Main Oven Door Outer PanelTo Remove an Oven Inner Back To Remove the Grill DoorTo Remove an Oven Element Thermal Cut-out To Remove the Fan Oven ElementTo Change Oven Light Bulb To Replace an Oven FanTo Remove Grill Element Circuit Diagram Oven KeyCircuit Diagram Hob Connections Technical DataDimensions DocNo.000-0001 Back cover Rangemaster

U109941 - 02 specifications

The Rangemaster U109941 - 02 is a remarkable appliance that brings elegance, efficiency, and innovation to modern kitchens. Known for its exceptional performance and stylish design, this range integrates cutting-edge technologies with user-centric features, making cooking a delightful experience.

One of the standout features of the Rangemaster U109941 - 02 is its powerful cooking capabilities. With multiple burners and a spacious oven, it allows home chefs to prepare a variety of meals simultaneously. The burners offer precise temperature control, thanks to their advanced ignition system which ensures quick start-ups and stable flames. This precise control is essential for achieving perfect cooking results, whether you are simmering sauces or searing meats.

The oven of the Rangemaster U109941 - 02 is designed with sophisticated cooking technologies such as fan-assisted convection cooking. This feature distributes heat evenly throughout the oven, resulting in consistently cooked dishes and reducing cooking times. Additionally, the oven comes with multiple cooking modes, including baking, broiling, and slow cooking, providing versatility for diverse culinary techniques and recipes.

Energy efficiency is another hallmark of the Rangemaster U109941 - 02. Equipped with advanced insulation and a high-efficiency heating system, it minimizes energy consumption without compromising performance. This eco-friendly approach not only reduces utility bills but also lessens the environmental impact of cooking.

The design of the Rangemaster U109941 - 02 is equally impressive. It features a sleek, modern aesthetic that complements various kitchen styles, from contemporary to traditional. The materials used in construction are durable and easy to maintain, ensuring that this range withstands the rigors of daily cooking while maintaining its visual appeal.

Safety features are also a priority in the Rangemaster U109941 - 02. With flame failure devices and automatic shut-off functions, the appliance provides peace of mind in busy kitchens, ensuring that safety is never compromised.

In summary, the Rangemaster U109941 - 02 is a top-of-the-line cooking range that combines powerful performance, innovative technologies, and stylish design. Whether you are a home cook or a culinary enthusiast, this appliance stands ready to elevate your kitchen experience.
Top Page Image Contents