Rangemaster U109941 - 02 manual Clock, Setting the time of day, Minute Minder

Page 9

The Clock

Setting the time of day

The LCD clock is shown in (Fig.2-13). When the clock is first connected, the display flashes ( 0.00) and () alternately.

To set the time, turn and hold the Timer knob to the clock symbol () and at the same time turn the Adjusting knob left or right until the clock shows the time of day. Remember this is a 24-hour clock. Let go of the Timer knob and it will spring back to the vertical, oven manual setting.

Minute Minder

Turn the Timer knob to the right to the () minute minder setting – it should click into position (Fig.2-14).

Use the Adjusting knob to set the time you need (Fig.2-15).

You can either turn the knob back to the vertical manual setting () to keep an eye on the time of day, or leave it in the () minute minder position as the time ticks down.

To stop the beeper when it sounds, turn the Adjusting knob anti-clockwise.

To stop the left-hand oven at a specific time of day

Turn the Timer knob to the () position (Fig.2-16).

Use the Adjusting knob to set the time at which the oven is to stop. You can set the oven to turn on at any time over the following 24-hour period. AUTO shows in the display (Fig.2-17).

Turn the Timer knob to the bottom ‘AUTO’ setting. Once the set time is reached, the beeper sounds. Turn the Timer knob to the vertical () to return to manual cooking.

To start and then stop the left-hand oven using the Timer

Before you set the clock, decide on both the ‘cook time’, which is the period of time you want the oven to cook, and the ‘stop time’, which is the time of day at which you want the oven to stop cooking.

You cannot set a start time directly – this is set automatically by a combination of the ‘cook time’ and ‘stop time’.

Turn the Timer knob to the () position (Fig.2-18).

Use the Adjusting knob to set the ‘cooking time’ you need (Fig.2-19).

Turn the Timer knob to the () position. The display will show the current time of day plus the ‘cook time’ you just set. Use the Adjusting knob to set the ‘stop time’ required (Fig.2-20).

The ‘stop time’ is displayed, followed by ‘AUTO’. Set the oven(s) to the cooking temperature you need. Turn the Timer knob to the ‘AUTO’ setting.

When your cooking is finished, the beeper sounds. Turn the Timer knob to the vertical () to return to manual cooking.

ArtNo.300-0005 2BC minute minder setting

ArtNo.300-0006 2BC

minute minder setting 2

ArtNo.301-0007 2BC Stopping the oven 1

ArtNo.301-0008 2BC Stopping the oven 2

ArtNo.301-0009 2BC

Setting the cooking timer

ArtNo.301-0010 2BC

Setting the cookingtime

ArtNo.301-0008 2BC Stopping the oven 2

Fig.2-14

Fig.2-15

Fig.2-16

Fig.2-17

Fig.2-18

Fig.2-19

Fig.2-20

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Professional + Contents Installation and Maintenance SafetyPersonal Safety Peculiar SmellsHob Care CleaningCooker Care  do not use the hob surface as a cutting boardHob Cooker OverviewResidual Heat Indicator, H Pan DetectorAutomatic Heat-up, a Glide-out Grill Child Lock, LBoil Dry Function Ovens  Never close the grill door when the grill is onTo start and then stop the left-hand oven using the Timer Setting the time of dayClock Minute MinderKey Lock Auto is showing, but you want to revert to manual cookingOven Shelves Left-hand Main Oven AccessoriesOven shelves Right-hand Tall Oven Handyrack Main OvenMain Oven Light Tips on Cooking with the Timer Cooking TipsGeneral Oven Tips Meat Fan Oven Cooking TableCleaning Spills Cleaning Your CookerCleaning Burned-on Spills Daily CareControl Panel and Doors Removing the Panels to clean the Enamel Interior ‘Cook & Clean’ PanelsDoor Panel Tall OvenTroubleshooting Oven is not cooking evenly Oven temperature getting hotter as the cooker gets olderOven not coming on An oven light is not workingDear Installer InstallationSafety Requirements Provision of VentilationPositioning the Cooker Unpacking the CookerMoving the Cooker Repositioning the Cooker following Connection Completing the MoveLevelling Lower the Two Rear RollersHob Check Electrical ConnectionGrill Check Oven CheckTo Remove a Side Panel ServicingTo Lift up the Ceramic Hob To Replace a Hob ElementTo Remove the Electronic Timer To Replace a ThermostatTo Replace the Grill Controller To Adjust the Main Oven Door Catch Keep To Adjust an Oven Door Angle The door is heavy, so take care To Replace the Main Oven Door Outer PanelTo Remove an Oven Element Thermal Cut-out To Remove the Grill DoorTo Remove an Oven Inner Back To Remove the Fan Oven ElementTo Replace an Oven Fan To Remove Grill ElementTo Change Oven Light Bulb Key Circuit Diagram OvenCircuit Diagram Hob Technical Data DimensionsConnections DocNo.000-0001 Back cover Rangemaster

U109941 - 02 specifications

The Rangemaster U109941 - 02 is a remarkable appliance that brings elegance, efficiency, and innovation to modern kitchens. Known for its exceptional performance and stylish design, this range integrates cutting-edge technologies with user-centric features, making cooking a delightful experience.

One of the standout features of the Rangemaster U109941 - 02 is its powerful cooking capabilities. With multiple burners and a spacious oven, it allows home chefs to prepare a variety of meals simultaneously. The burners offer precise temperature control, thanks to their advanced ignition system which ensures quick start-ups and stable flames. This precise control is essential for achieving perfect cooking results, whether you are simmering sauces or searing meats.

The oven of the Rangemaster U109941 - 02 is designed with sophisticated cooking technologies such as fan-assisted convection cooking. This feature distributes heat evenly throughout the oven, resulting in consistently cooked dishes and reducing cooking times. Additionally, the oven comes with multiple cooking modes, including baking, broiling, and slow cooking, providing versatility for diverse culinary techniques and recipes.

Energy efficiency is another hallmark of the Rangemaster U109941 - 02. Equipped with advanced insulation and a high-efficiency heating system, it minimizes energy consumption without compromising performance. This eco-friendly approach not only reduces utility bills but also lessens the environmental impact of cooking.

The design of the Rangemaster U109941 - 02 is equally impressive. It features a sleek, modern aesthetic that complements various kitchen styles, from contemporary to traditional. The materials used in construction are durable and easy to maintain, ensuring that this range withstands the rigors of daily cooking while maintaining its visual appeal.

Safety features are also a priority in the Rangemaster U109941 - 02. With flame failure devices and automatic shut-off functions, the appliance provides peace of mind in busy kitchens, ensuring that safety is never compromised.

In summary, the Rangemaster U109941 - 02 is a top-of-the-line cooking range that combines powerful performance, innovative technologies, and stylish design. Whether you are a home cook or a culinary enthusiast, this appliance stands ready to elevate your kitchen experience.
Top Page Image Contents