ANTI-TIP Brackets, Installation | Perlick HP15BS, HP15RS specification

ANTI-TIP BRACKETS

WARNING

Unit may tip forward if loaded racks/shelves are all pulled out at the same time. To prevent tipping and provide a stable installation, the unit must be secured in place with the anti-tip brackets provided with the unit.

A set of metal anti-tip brackets and necessary hardware is supplied with the unit. The anti-tip brackets, when properly installed, should secure the rear legs and prevent the unit from tipping forward.

Some installation sites may require modification to provide a secure surface for attaching brackets. Refer to Figure 3 (below) for mounting bracket locations for 15” Signature Series models.

IMPORTANT NOTE: If installing on a concrete floor, concrete fasteners are required and are not included in the Anti-Tip Kit.

Figure 3 - 15” Anti-Tip Kit Drawing

Operation & Installation Manual

Signature Series (HP15 model)

WARNING

Shut off power to the wall outlet before installing unit into the opening.

2.Check that the following are level and square:

• front face and interior opening

• installation opening and floor surface

• countertop bottom front edge

IMPORTANT NOTE: The floor under the unit must be at the same level as the surrounding finished floor.

3.If all surfaces are level, refer to Figure 4 (below) and perform the following:

a.Measure from the floor to the bottom of the front edge of the countertop.

b.Mesure the rear of the unit cabinet from floor to top of cabinet, at back corners.

c.Adjust rear legs so B measurement equals A measurement. Using an adjustable wrench or pliers, turn legs counter- clockwise to raise the unit or clockwise to lower the unit.

IMPORTANT NOTE: Leveling legs should not extend more than 3/4” from bottom of the unit.

4.Slide cabinet into position. Make sure the rear levelling legs slide under the anti-tip brackets. Push the unit into the open-

ing until the bottom front edge of the unit is flush with the surrounding cabinetry, or until the rear legs are tight against the anti-tip brackets.

Figure 4 - Leveling

INSTALLATION

CAUTION

Finished flooring should be protected with the appropriate material to avoid damage from moving the unit.

If unit has been laid on its back or sides, place unit upright and allow minimum of 24 hours before connecting power.

1.Plug in the unit into the 15 amp grounded outlet located in the installation opening. With power applied to the unit, check that the lighting and cooling function operate properly, then turn off power to the wall outlet at the circuit breaker.

HP15BS, HP15RS specifications

The Perlick HP15RS and HP15BS are premium undercounter refrigeration units designed to elevate the home entertaining experience. With their sleek aesthetics and performance-driven features, these models stand out in the crowded market of beverage centers and outdoor fridges.

One of the main features of the HP15RS and HP15BS is their impressive storage capacity. Both models can hold up to 15 standard wine bottles or 30 cans, making them perfect for hosting gatherings or simply keeping your favorite beverages on hand. The interior is designed with adjustable shelves, allowing for versatile storage solutions. This flexibility is enhanced by the full-extension shelves that let you access items at the back without hassle.

A key technology integrated into both models is the PreciseTemp temperature control system. This advanced cooling technology ensures that beverages are maintained at the ideal temperature, providing optimal conditions for both wines and other beverages. The digital control panel allows for easy temperature adjustments, giving users full control over the storage environment.

Energy efficiency is another highlight of the HP15RS and HP15BS. These models are designed to consume less energy while maintaining high cooling performance, conforming to Energy Star guidelines. This not only reduces electricity bills but also minimizes environmental impact.

The Perlick HP15RS features a stylish stainless-steel finish, whereas the HP15BS comes in a black stainless steel variant. Both finishes are fingerprint-resistant, ensuring that your appliance maintains its sleek appearance over time. The units are also equipped with a reversible door, providing flexibility for installation in various spaces.

Additionally, both models incorporate an integrated LED lighting system that illuminates the interior without producing excess heat. This feature not only enhances visibility but also adds an elegant touch to the overall design.

Durability is key in the construction of the HP15RS and HP15BS. They are built with heavy-duty materials, ensuring long-lasting performance in various environments, whether indoors or outdoors. With a focus on quality and functionality, Perlick's undercounter refrigeration units truly stand out as an excellent choice for beverage storage, offering a perfect blend of style and practicality for the modern home.