Solving common
PROBLEM
Ice dispenser won’t work
ice maker/dispenser problems
CAUSESOLUTlONS
l Freezer door open l Close the freezer door.
l Ice bin not properly l Make sure bin is pushed in all the way. installed
l Wrong ice in bin l Use only crescents from ice maker.
Ice dispenser stops working
l
l
Dispenser not used for extended periods, causing ice cubes to melt together
Ice dispenser bar held in too long
l
l
l
Shake the bin occasionally to keep cubes separated and to obtain increased storage capacity.
Dump old ice and make a new supply.
Wait about 3 minutes for the dispenser motor to reset.
Large amounts of ice should be taken from the bin, not through the dispenser.
Removing | the base grille |
To remove the grille: |
|
1. Open both doors. | Condenser |
2.Pull base grille forward to release the support tabs from the metal clips.
3.Do not remove Tech Sheet fastened behind the grille.
To replace the grille:
1.Line up grille support tabs with metal clips.
2.Push firmly to snap into place.
3.Close the doors.
See cleaning instructions for defrost pan and condenser coils on page 18.
14