Changing the control
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call us. (See page 23.)
settings
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
CONDITION: | REASON: |
|
| ||
If Refrigerator | Door | opened | often | ||
Section is | Large | amount | of food added | ||
TOO WARM | Room temperature | too warm | |||
If Freezer | Door | opened | often | ||
Section is | Large | amount | of food added | ||
TOO WARM | Very | cold room temperature | |||
| (can’t | cycle often | enough) | ||
If Refrigerator | Controls | not | set correctly | ||
Section is | for your | conditions |
| ||
TOO COLD |
|
|
|
|
|
RECOMMENDED CONTROL SElllNGS:
Refrigerator 4
FreezerA
Refrigerator 3
FreezerC
Refrigerator 2
Freezer6
If ICE isn’t
MADE FAST ENOUGH
If BOTH SECTIONS
are TOO WARM
Heavy ice usage
Very cold room temperature (can’t cycle often enough)
Door opened often
Large amount of food added Very warm or very cold mom temperatures
Refrigerator 3
FreezerC
Refrigerator 4
Freezer6
Adjusting the refrigerator
Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.
To remove shelves:
1.Remove items from shelf.
2.Tilt shelf up at front.
3.Lift shelf up at back.
4.Pull shelf straight out.
To replace shelves:
1.Guide the rear hooks into the slots in the shelf supports.
2.Tilt up front of shelf until hooks drop into slots.
3.Lower front of shelf to level position.
shelves
Glass shelves are heavy. Handle them with care.
8