Before Using Your Refrigerator, Cleaning it

Before Using Your

Refrigerator

In This	Section		Page			Page
			Page			Page
Cleaning	It	........................................	.......5	InstallIng	It properly	....... 5
Plugglng	lt	In	...... 5	Leveling	It	......6

It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to a power source, install it and level it.

Cleaning it

Removing packaging materials

Remove tape and any inside labels (except the model and serial number label) before using the refrigerator.

To remove any remaining glue:

l Rub briskly with thumb to make a ball, then remove.

l Soak area with liquid hand-dishwashing detergent before removing glue as de- scribed above. Do not use sharp instru- ments, rubbing alcohol, flammable fluids or abrasive cleaners. These can damage the material. See “Important Safety Instruc- tions” above.

NOTE: Do not remove any permanent

. ~. . . . . . .-

instructron labels inside your refrigerator. Do not remove the Tech Sheet fastened under the refrigerator at the front.

Cleaning it before use

After removing all packaging materials, clean your refrigerator before using it, if necessary. See cleaning instructions on pages 17-l 6.

Plugging it in

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15 or 20 ampere fused and properly grounded electrical supply is required. lt is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.

See Electrical Requirements and Ground- ing Instructions Sheet in your Literature Package.

&prong grounding type wall receptacle

Refrigerator power cord

grounding Plug