Expansion Valve, Installers Set up | Sea Frost Bait Freezer guide

EXPANSION VALVE

The expansion valve/ liquid line/drier connects to one of the plate fittings and at the discharge fitting on the compressor section.

After assembly externally mounted, valves will need to be insulated to prevent frost and sweating.

Installers Set up

The constant pressure valve sets the refrigerant boiling point. The pressure setting will indicate the minimum temperature that the freezer system can obtain. It has been pre set at the factory. Observing the low side pressure with gauges, note that the pressure is constant at 2 to 8 psi. , depending on the valve setting. If adjustment is needed, set the valve pressure at the lowest possible pressure setting that will cool the box. The plate temperature will always be at least 5 to 10 degrees colder than the box. Problems will occur when the pressure is high and the thermostat is set low; the thermostat will never be satisfied. The compressor will never stop. Refer to a pressure temperature chart for R-134a. to be sure the plate can reach the thermostat cutout temperature.

A poorly insulated box will require a higher pressure setting to obtain any freezing and will never freeze rock hard.

Bait Freezer specifications

The Sea Frost Bait Freezer is a game changer for anglers looking to preserve bait with optimal efficiency and performance. Engineered specifically for marine environments, this bait freezer offers innovative technology and superior features that ensure your bait remains fresh and effective for extended periods.

One of the standout features of the Sea Frost Bait Freezer is its robust refrigeration system, designed to quickly lower temperatures to the required levels, ensuring that bait is frozen swiftly to lock in freshness. This rapid freezing process helps to maintain the integrity of the bait, preventing cell damage that can occur in conventional freezers.

The freezer is equipped with advanced insulation technology, which minimizes heat transfer and significantly enhances energy efficiency. This means anglers can depend on a consistent, reliable temperature for their bait, even in warmer climates or during extended boating trips. The high-density foam insulation used in the construction helps retain cold air, allowing the Sea Frost Bait Freezer to operate efficiently without excessive energy consumption.

For convenience, the Sea Frost Bait Freezer features easy-to-use digital controls, which allow users to monitor and adjust temperatures with precision. The digital display offers real-time temperature readings, crucial for ensuring bait is stored under optimal conditions. Additionally, a built-in alarm system notifies users of any temperature fluctuations, safeguarding the quality of the bait at all times.

The design of the Sea Frost Bait Freezer emphasizes portability and ease of use. With durable handles and a lightweight structure, it can be easily transported on boats or to fishing spots. Its waterproof exterior is resistant to harsh marine conditions, ensuring longevity and reliability.

Moreover, the freezer comes with various storage options, including removable bins and compartments, allowing for customizable organization of different types of bait. This versatility enables anglers to maximize their storage capacity while keeping their bait easily accessible.

In conclusion, the Sea Frost Bait Freezer is the ideal solution for serious anglers who prioritize the quality and preservation of their bait. With its advanced freezing technology, energy-efficient design, user-friendly controls, and sturdy construction, this bait freezer stands out as an essential piece of equipment for successful fishing trips.