Sea Frost Bait Freezer manual Installing a Jumper, Installing the Return Line, Thermostat

Page 5

Installing a Jumper

If installing a multi plate system, use the jumper to connect the remaining tube on the first plate to either tube on the second plate.

Installing the Return Line

Connect a return line to the remaining tube. This return line connects to the compressor.

Support the tubing every 18 inches as necessary with mountable tie wraps and self taping screws.

THERMOSTAT

Thermostat Location

The thermostat is low voltage and is connected and powered by the transformer in the compressor cabinet. Mount the thermostat in a convenient location where the sensing bulb will reach a mounting screw on a plate. It is necessary that the bulb of the sensor have good thermal contact with the plate. Attach the bulb to the plate using the stainless clip. Use one of the existing plate mounting screws as an attachment point.

On multiple plate installations, the thermostat must sense the last plate in the series after the valve. The probe temperature is displayed when 220-volt power is available. The probe temperature is not the cabinet temperature. The probe temperature is always colder than the cabinet.

Thermostat Wiring

The Ranco Electronic Temperature Control operates on low voltage (24VAC) supplied by the transformer in the compressor cabinet.

A 15’ wiring harness is fitted to the thermostat. Use red, blue, and white 16-gauge wire to extend this harness if a longer length is needed. Attach the wires to the terminal strip using #8 ring terminals, matching corresponding wire color.

5

Image 5
Contents Operation Pre-chargedDescription Condensing Unit Location and Mounting Installation RequirementsAir Cooled Air and Water CooledQuick Connect Fitting Instructions Evaporator Plate InstallationExpansion Valve Installers Set upInstalling the Return Line Installing a JumperThermostat Thermostat LocationThermostat has been pre-set at the factory for Fahrenheit Thermostat OperationReading the Sight Glass Sight Glass Detail Volt CircuitRE-CHARGING or Adding Refrigerant Troubleshooting Defrosting

Bait Freezer specifications

The Sea Frost Bait Freezer is a game changer for anglers looking to preserve bait with optimal efficiency and performance. Engineered specifically for marine environments, this bait freezer offers innovative technology and superior features that ensure your bait remains fresh and effective for extended periods.

One of the standout features of the Sea Frost Bait Freezer is its robust refrigeration system, designed to quickly lower temperatures to the required levels, ensuring that bait is frozen swiftly to lock in freshness. This rapid freezing process helps to maintain the integrity of the bait, preventing cell damage that can occur in conventional freezers.

The freezer is equipped with advanced insulation technology, which minimizes heat transfer and significantly enhances energy efficiency. This means anglers can depend on a consistent, reliable temperature for their bait, even in warmer climates or during extended boating trips. The high-density foam insulation used in the construction helps retain cold air, allowing the Sea Frost Bait Freezer to operate efficiently without excessive energy consumption.

For convenience, the Sea Frost Bait Freezer features easy-to-use digital controls, which allow users to monitor and adjust temperatures with precision. The digital display offers real-time temperature readings, crucial for ensuring bait is stored under optimal conditions. Additionally, a built-in alarm system notifies users of any temperature fluctuations, safeguarding the quality of the bait at all times.

The design of the Sea Frost Bait Freezer emphasizes portability and ease of use. With durable handles and a lightweight structure, it can be easily transported on boats or to fishing spots. Its waterproof exterior is resistant to harsh marine conditions, ensuring longevity and reliability.

Moreover, the freezer comes with various storage options, including removable bins and compartments, allowing for customizable organization of different types of bait. This versatility enables anglers to maximize their storage capacity while keeping their bait easily accessible.

In conclusion, the Sea Frost Bait Freezer is the ideal solution for serious anglers who prioritize the quality and preservation of their bait. With its advanced freezing technology, energy-efficient design, user-friendly controls, and sturdy construction, this bait freezer stands out as an essential piece of equipment for successful fishing trips.