Evaporator Plate Installation

Mount the plates on opposite walls as high as possible to take advantage of thermal convection. Install the plates with the Wellnut, spacers and screws provided.

The plate(s) mounts with a

Wellnut expandable neoprene blind

hole fastener. A template or the plate itself should be used to locate the mounting holes. Drill a 3/16" pilot hole. Increase this hole to 3/8". Install the screw into the plate through the spacer then tighten the screw in the Wellnut. Install the plate pushing the rubber mounts in to the pre- drilled holes. Tighten the screws.

QUICK CONNECT FITTING INSTRUCTIONS

Aeroquip quick connect fittings are used in this pre-charged system. These fittings reseal upon disconnecting and do not leak during assembly.

If installing this compressor in an existing system. Use LSA line adapters to interface with the new compressor. Attach, evacuate using a vacuum pump, leak check, and then add a vapor charge of R-134a before connecting to the pre- charged condensing unit.

In a pre charged system installation make all the connections up to the compressor first. The last two connections should be the suction fitting then the discharge fitting.

To assemble, remove the heat shrink and plastic cap. Be sure the threads and the end of the fittings are clean.

Finger tighten the fittings to avoid cross threading. Tighten to wrench snug and then pull up 1/16 turn.

When making all connections, USE TWO WRENCHES. Don’t allow the fittings to turn or twist when tightening.

Bait Freezer specifications

The Sea Frost Bait Freezer is a game changer for anglers looking to preserve bait with optimal efficiency and performance. Engineered specifically for marine environments, this bait freezer offers innovative technology and superior features that ensure your bait remains fresh and effective for extended periods.

One of the standout features of the Sea Frost Bait Freezer is its robust refrigeration system, designed to quickly lower temperatures to the required levels, ensuring that bait is frozen swiftly to lock in freshness. This rapid freezing process helps to maintain the integrity of the bait, preventing cell damage that can occur in conventional freezers.

The freezer is equipped with advanced insulation technology, which minimizes heat transfer and significantly enhances energy efficiency. This means anglers can depend on a consistent, reliable temperature for their bait, even in warmer climates or during extended boating trips. The high-density foam insulation used in the construction helps retain cold air, allowing the Sea Frost Bait Freezer to operate efficiently without excessive energy consumption.

For convenience, the Sea Frost Bait Freezer features easy-to-use digital controls, which allow users to monitor and adjust temperatures with precision. The digital display offers real-time temperature readings, crucial for ensuring bait is stored under optimal conditions. Additionally, a built-in alarm system notifies users of any temperature fluctuations, safeguarding the quality of the bait at all times.

The design of the Sea Frost Bait Freezer emphasizes portability and ease of use. With durable handles and a lightweight structure, it can be easily transported on boats or to fishing spots. Its waterproof exterior is resistant to harsh marine conditions, ensuring longevity and reliability.

Moreover, the freezer comes with various storage options, including removable bins and compartments, allowing for customizable organization of different types of bait. This versatility enables anglers to maximize their storage capacity while keeping their bait easily accessible.

In conclusion, the Sea Frost Bait Freezer is the ideal solution for serious anglers who prioritize the quality and preservation of their bait. With its advanced freezing technology, energy-efficient design, user-friendly controls, and sturdy construction, this bait freezer stands out as an essential piece of equipment for successful fishing trips.