Sea Frost Bait Freezer manual Thermostat Operation

Page 6

Thermostat Operation

The thermostat is pre-set and locked at the factory. When locked the keypad is disabled and changes to the settings cannot be made. To change the settings the lockout switch must be placed in the unlock position.

To access the lockout switch:

1.Switch off the power.

2.Remove the four screws and cover.

3.Slide the lockout switch to the right to the unlock position.

4.Replace the cover.

5.Re-power the system.

6.To program refer to table below.

Step

Display

Description

1

F or C

Fahrenheit or Celsius Scale

 

 

Press the set key once to access the Fahrenheit / Celsius

 

 

scale. The display will show the current status, either F for

 

 

degrees Fahrenheit or C for degrees Celsius. The

 

 

thermostat has been pre-set at the factory for Fahrenheit.

 

 

Press the up or down arrow key to choose between the F

 

 

and C.

2

S1 (blinking)

Setpoint Temperature

 

 

Press the set key again to access the setpoint. The display

 

 

will show the current set point. The setpoint has been pre-

 

 

set to 0 degrees F. Press either the up or down arrow key

 

 

to change the setpoint to the desired temperature.

3

DIF 1 (blinking)

Differential Temperature

 

 

Press the set key again to access the differential. The

 

 

display will show the current differential. The differential

 

 

temperature has been pre-set at 5 degrees F. Press either

 

 

the up or down arrow key to increase or decrease the

 

 

differential setting.

4

C1 / H1

Cooling or Heating Mode

 

 

Press the set key again to access the heating or cooling

 

 

mode. The display will show the current mode. C1 for

 

 

cooling or H1 for heating. The Thermostat has been pre-

 

 

set for C1. Do not change this setting. The BF does not

 

 

work in heat mode. Press the set key once more and

 

 

programming is complete.

Note: Pressing the set key accepts the setting and brings you to the next step. You must push the set key through all steps to return to the temperature display to allow the compressor to operate.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Pre-charged DescriptionOperation Air Cooled Installation RequirementsCondensing Unit Location and Mounting Air and Water CooledEvaporator Plate Installation Quick Connect Fitting InstructionsInstallers Set up Expansion ValveThermostat Installing a JumperInstalling the Return Line Thermostat LocationThermostat Operation Thermostat has been pre-set at the factory for FahrenheitVolt Circuit RE-CHARGING or Adding RefrigerantReading the Sight Glass Sight Glass Detail Troubleshooting Defrosting

Bait Freezer specifications

The Sea Frost Bait Freezer is a game changer for anglers looking to preserve bait with optimal efficiency and performance. Engineered specifically for marine environments, this bait freezer offers innovative technology and superior features that ensure your bait remains fresh and effective for extended periods.

One of the standout features of the Sea Frost Bait Freezer is its robust refrigeration system, designed to quickly lower temperatures to the required levels, ensuring that bait is frozen swiftly to lock in freshness. This rapid freezing process helps to maintain the integrity of the bait, preventing cell damage that can occur in conventional freezers.

The freezer is equipped with advanced insulation technology, which minimizes heat transfer and significantly enhances energy efficiency. This means anglers can depend on a consistent, reliable temperature for their bait, even in warmer climates or during extended boating trips. The high-density foam insulation used in the construction helps retain cold air, allowing the Sea Frost Bait Freezer to operate efficiently without excessive energy consumption.

For convenience, the Sea Frost Bait Freezer features easy-to-use digital controls, which allow users to monitor and adjust temperatures with precision. The digital display offers real-time temperature readings, crucial for ensuring bait is stored under optimal conditions. Additionally, a built-in alarm system notifies users of any temperature fluctuations, safeguarding the quality of the bait at all times.

The design of the Sea Frost Bait Freezer emphasizes portability and ease of use. With durable handles and a lightweight structure, it can be easily transported on boats or to fishing spots. Its waterproof exterior is resistant to harsh marine conditions, ensuring longevity and reliability.

Moreover, the freezer comes with various storage options, including removable bins and compartments, allowing for customizable organization of different types of bait. This versatility enables anglers to maximize their storage capacity while keeping their bait easily accessible.

In conclusion, the Sea Frost Bait Freezer is the ideal solution for serious anglers who prioritize the quality and preservation of their bait. With its advanced freezing technology, energy-efficient design, user-friendly controls, and sturdy construction, this bait freezer stands out as an essential piece of equipment for successful fishing trips.
Top Page Image Contents