John Lewis JLDWW 906 instruction manual Select and start a washing programme

Page 21

5.To memorise the operation, switch off the dishwasher by pressing the On/off button.

If you decide to revert back to the use of individual detergents we advise that you:

1.Deactivate the Multi tab function.

2.Fill up the salt container and the rinse aid dispenser again.

3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.

4.Adjust the water hardness setting according to the hardness of the water in your area.

5.Adjust the rinse aid dosage.

Select and start a washing programme

Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until then it is possible to modify the settings.

1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate.

2.Check that the water tap is opened.

3.Press the On/Off button. The dishwasher must be in setting mode.

4.Press one of the two programme buttons to select a washing programme. When a programme is selected the corresponding programme light illuminates and the

programme time flashes on the digital display.

For the selection of the washing programme see "Washing programmes" chart.

Close the dishwasher door, the programme starts automatically. In the digital display the programme time is no longer flashing but fixed with static light.

The selection of the washing programme can be made with the door closed. Keep in mind that this way, once a washing programme has been selected you have ONLY 3 seconds in which you can select: another washing programme, delay start and half load option. After these 3 seconds the selected programme will start automatically.

21

Image 21

Contents Jldww Important safety information InstallationChild safety Maintenance and cleaning Service General safetyCorrect use Ecological hintsEnvironmental information Contents Description of the appliance Digital display indicates Control panelSetting mode Indicator lightsMulti tab button Function buttonsTo cancel a set programme or a programme in progress Washing programmesType of load Programme description Type of load Programme Rinse hold Degree of soilHalf load option available with programme Energy Consumption KWhWhen the dishwasher is first installed Water softenerUse of salt Setting manually Setting the water softenerSetting electronically ExamplesFilling with dishwasher salt Filling with rinse aidTo fill Ensure that the lid is closed after every refill Adjusting the rinse aid dosageDaily use Loading cutlery and dishesAre of limited suitability Cutlery basket Lower basketUpper basket Adjusting the height of the upper basket Fill with detergent Use of detergent To move to the higher position proceed as follows Maximum height of the dishesWhen using detergent tablets place the tablet in compartment Activation/deactivation of the Multi tab function Multi tab functionSelect and start a washing programme Setting and starting the programme with delay start Cancelling a delay start or a washing programme in progressInterrupt a washing programme in progress Maintenance and cleaning Cleaning the filtersUnloading the dishwasher Internal cleaning External cleaningProlonged periods of non- operation Never use the dishwasher without filtersFrost precautions Something not workingMoving the machine Anti-flood device is activated Possible cause and solution Page Installation Technical dataUnpacking Fitting under a counterWater connections LevellingWater supply connections Water outlet hose connection Water inlet hose with safety valvePage Repairs After sales service Electrical connection0870 010 Spare parts Page Page 117986680 01 072007 Subject to change without notice