John Lewis JLDWW 906 Electrical connection, Repairs After sales service, 0870 010

Page 32

Electrical connection

Warning! Safety standards require the appliance to be earthed.

Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate.

Always plug the mains plug into a correctly installed shockproof socket. Multi-way plugs, connectors and extension cables must not be used. This could constitute a fire hazard through overheating.

If necessary, have the domestic wiring system socket replaced. In case that the electrical cable has to be replaced, contact your local repair agent.

The plug must be accessible after the appliance has been installed.

Never unplug the appliance by pulling on the cable. Always pull the plug. The manufacturer accepts no liability for failure to observe the above safety precautions.

Repairs - After sales service

If the unlikely event of your appliance requiring service, or if you wish to purchase spare parts, please contact our extended warranty administrators by telephoning:

0870 010 7887

They will give you details of your local Service Force Centre.

Before calling out an engineer, please ensure you have read the details under the heading ''Something Not Working''.

When you contact your local repair agent you will need to give the following details:

1.Your name, address and post code.

2.Your telephone number.

3.Clear and concise details of fault.

32

Image 32
Contents Jldww Child safety Important safety informationInstallation General safety Maintenance and cleaning ServiceCorrect use Ecological hintsEnvironmental information Contents Description of the appliance Control panel Digital display indicatesIndicator lights Setting modeMulti tab button Function buttonsType of load Programme description To cancel a set programme or a programme in progressWashing programmes Programme Rinse hold Degree of soil Type of loadHalf load option available with programme Energy Consumption KWhUse of salt When the dishwasher is first installedWater softener Setting the water softener Setting manuallySetting electronically ExamplesTo fill Filling with dishwasher saltFilling with rinse aid Adjusting the rinse aid dosage Ensure that the lid is closed after every refillAre of limited suitability Daily useLoading cutlery and dishes Lower basket Cutlery basketAdjusting the height of the upper basket Upper basketUse of detergent Fill with detergentTo move to the higher position proceed as follows Maximum height of the dishesWhen using detergent tablets place the tablet in compartment Multi tab function Activation/deactivation of the Multi tab functionSelect and start a washing programme Interrupt a washing programme in progress Setting and starting the programme with delay startCancelling a delay start or a washing programme in progress Unloading the dishwasher Maintenance and cleaningCleaning the filters External cleaning Internal cleaningProlonged periods of non- operation Never use the dishwasher without filtersMoving the machine Frost precautionsSomething not working Anti-flood device is activated Possible cause and solution Page Technical data InstallationUnpacking Fitting under a counter Water supply connections Water connections Levelling Water inlet hose with safety valve Water outlet hose connectionPage 0870 010 Repairs After sales serviceElectrical connection Spare parts Page Page 117986680 01 072007 Subject to change without notice