John Lewis JLDWW 906 Water inlet hose with safety valve, Water outlet hose connection

Page 30

The water pressure must be within the limits given in the "Technical data". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with a locknut.)

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

DO NOT use connection hoses which have previously been used on an old appliance.

This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. This appliance complies with the applicable plumbing regulations.

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

•The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

•If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

•A water inlet hose with safety valve must only be replaced by a local repair agent.

Warning! Dangerous voltage

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.To a stand pipe provided with venthole,

minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Jldww Important safety information InstallationChild safety Correct use General safetyMaintenance and cleaning Service Ecological hintsEnvironmental information Contents Description of the appliance Control panel Digital display indicatesMulti tab button Indicator lightsSetting mode Function buttonsTo cancel a set programme or a programme in progress Washing programmesType of load Programme description Half load option available with programme Programme Rinse hold Degree of soilType of load Energy Consumption KWhWhen the dishwasher is first installed Water softenerUse of salt Setting electronically Setting the water softenerSetting manually ExamplesFilling with dishwasher salt Filling with rinse aidTo fill Adjusting the rinse aid dosage Ensure that the lid is closed after every refillDaily use Loading cutlery and dishesAre of limited suitability Lower basket Cutlery basketAdjusting the height of the upper basket Upper basketTo move to the higher position proceed as follows Use of detergentFill with detergent Maximum height of the dishesWhen using detergent tablets place the tablet in compartment Multi tab function Activation/deactivation of the Multi tab functionSelect and start a washing programme Setting and starting the programme with delay start Cancelling a delay start or a washing programme in progressInterrupt a washing programme in progress Maintenance and cleaning Cleaning the filtersUnloading the dishwasher Prolonged periods of non- operation External cleaningInternal cleaning Never use the dishwasher without filtersFrost precautions Something not workingMoving the machine Anti-flood device is activated Possible cause and solution Page Unpacking Technical dataInstallation Fitting under a counterWater connections LevellingWater supply connections Water inlet hose with safety valve Water outlet hose connectionPage Repairs After sales service Electrical connection0870 010 Spare parts Page Page 117986680 01 072007 Subject to change without notice

JLDWW 906 specifications

The John Lewis JLDWW 906 is a well-regarded appliance in the realm of dishwashers, combining efficiency and elegance to meet the demands of modern households. This fully integrated dishwasher is designed to seamlessly blend into kitchen cabinetry while providing powerful cleaning capabilities, making it a popular choice among homeowners looking for both functionality and aesthetics.

One of the standout features of the JLDWW 906 is its impressive capacity. With space for up to 14 place settings, this dishwasher is perfect for families or those who frequently entertain guests. The adjustable racks and flexible basket solutions allow users to customize the interior layout, accommodating larger pots, pans, and glassware effortlessly.

In terms of performance, the John Lewis JLDWW 906 employs several advanced technologies. The dishwasher features a highly efficient water management system that optimizes water usage without compromising on cleanliness. This eco-friendly approach not only aids in reducing water bills but also supports environmental sustainability. Additionally, the JLDWW 906 operates at a commendably low noise level, making it ideal for open-plan living spaces where noise might be an issue.

Another notable characteristic of this model is its multiple wash programs. With various settings designed for different types of loads, users can choose from options such as Intensive, Eco, and Quick Wash, tailoring each cycle to their specific needs. The Quick Wash option is particularly convenient for those needing clean dishes in a hurry, providing excellent results in a fraction of the time.

Energy efficiency is another key feature of the John Lewis JLDWW 906. It boasts a high energy rating, ensuring that it operates with minimal energy consumption. This not only helps in lowering utility bills but also contributes to a reduced carbon footprint, making it an environmentally conscious choice for consumers.

Lastly, the user-friendly control panel provides an intuitive interface, allowing for easy selection of wash programs and settings. The stylish design, complete with a sleek finish, makes the JLDWW 906 an attractive addition to any kitchen.

In conclusion, the John Lewis JLDWW 906 is a durable and efficient dishwasher that excels in both design and performance. Its array of features and technologies makes it a reliable option for any household looking to simplify their dishwashing routine while achieving excellent cleaning results.
Top Page Image Contents