ENGLISH | 17 |
Frost precautions
Caution! Do not install the appliance where the temperature is below 0 °C. The
manufacturer is not responsible for damage because of frost.
If not possible, empty the appliance and close the door. Disconnect the water inlet hose and remove water from the water inlet hose.
What to do if…
The appliance does not start or stops during operation.
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, contact your dealer or the After Sales Service.
Problem
•Continuous flash of the light of the
running pro- gramme.
•Intermittent audi- ble signal.
•1 flash of the end indicator light.
Malfunction:
The dishwasher does not fill with wa- ter.
•Continuous flash of the light of the
running pro- gramme.
•Intermittent audi- ble signal.
•2 flashes of the
end indicator
light.
Malfunction:
The dishwasher will not drain.
Possible cause
The water tap is blocked or furred with limescale.
The water tap is closed.
The filter in the water inlet hose is blocked.
The connection of the water inlet hose is not correct. The hose can be kinked or squashed.
There is a blockage in the sink spi- got.
The connection of the water drain hose is not correct. The hose can be kinked or squashed.
Solution
Clean the water tap.
Open the water tap.
Clean the filter.
Make sure that the connection is correct.
Clean the sink spigot.
Make sure that the connection is correct.