John Lewis JLBIIH603 Using the timer, Selecting a cooking zone, Automatic cut-out

Using the timer

All cooking zones can use each use one of the two timer functions at the same time.

Function	Condition	Outcome after the time has
		elapsed
Automatic cut-out	a heat setting is set	acoustic signal
		00 flashes
		Cooking zone switches off
Countdown timer	cooking zones not in use	acoustic signal
		00 flashes

3If a cooking zone is switched off, the timer function set is also switched off.

3If a heat setting is set on this cooking zone in addi- tion to a countdown timer, the cooking zone is switched off after the time set has elapsed.

Selecting a cooking zone

Step		Control panel	Display
1.	Touch	once	Pilot light of the first cooking zone flashes

2.

Touch once

Pilot light of the second cooking zone flashes

3.

Touch once

Pilot light of the third cooking zone flashes

4.

Touch once

Pilot light of the fourth cooking zone flashes

3The heat setting indicator of the selected cooking zone goes out, as long as the timer time can be set.

3If the pilot light is flashing more slowly, the heat set- ting indicator appears again and the heat setting can be re-set or modified.

3If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes.

15