John Lewis JLBIOS602 instruction manual Safety and Energy Saving Functions, To unlock the oven

To Programme the Oven to Switch On and Off

1)Carry out the "Cooking Duration" setting as described in the relevant chapter.

2)Press button Time function until the "End of Cooking"

function is selected and the relevant symbol flashes. The control panel will display the end of cooking time (that is, the actual time + cooking duration time - Fig. 14).

3)Press button ““ to select the required end of cooking time.

4)After this is set, the programmer will wait 3 seconds and then start running.

5)The oven will switch on and off automatically.The end of cooking will be marked by an acoustic alarm.

6)To switch off the acoustic alarm, press any button.

To cancel the programme, simply cancel the Duration Time.

Cooking duration				End of cooking
Minute timer				Time
	Oven	Fast	Time
	functions	heat-up	functions

Fig. 14

Safety and Energy Saving Functions

Safety Cut-Off Function

The oven will switch off automatically if any change of setting is made, according to the table below (Fig. 15).

If temperature setting is:	the oven will switch off:
250°C	after 3 hours
from 200 up to 245°C	after 5,5	hours
from 120 up to 195°C	after 8,5	hours
less than 120°C	after 12 hours

Cooking duration				End of cooking
Minute timer				Time
	Oven	Fast	Time
	functions	heat-up	functions

Fig. 15

Residual Heat Function

When a Cooking Duration time is set, the oven will automatically switchoffafewminutesbeforetheendoftheprogrammedtime,and usetheresidualheattofinishyourdisheswithoutenergyconsumption. AllcurrentsettingswillbedisplayeduntiltheCookingDurationtime is over.

This function will not operate when the Cooking Duration time is less than 15 minutes.

Child Safety Function

To avoid children switching on the oven, it is possible to lock the oven controls.

1)	Turn off the oven by pressing button		.
2)	Press buttons Oven function and “	“ at the same time
	and keep them pressed for about 3 seconds.An acoustic
	signal will be emitted and the indication ‘SAFE’ will
	appear on the display (Fig. 16).

3)The oven is now locked. Neither oven functions nor temperatures can be selected.

To unlock the oven:

Press buttons Oven function and “ “ at the same time and keep them pressed for about 3 seconds. An acoustic signal will be emitted and the indication ‘SAFE’ will go off. The oven can now be operated (Fig. 17).

Fig. 16

Fig. 17

13