3 Get started
Caution
•• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Phiips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
•• Ensure that the colors of the speaker wires and terminals are matched.
1 Hold down the socket flap.
2 Insert the stripped part of the wire completely.
• Insert the right speaker wires to “HIGH CH R/LOW CH R”, left speaker wires to “HIGH CH L/LOW CH L”.
• Insert the red/blue wires to “+”, black/grey wires to
3 Release the socket flap.
a 
b c
12EN
Speaker | Speaker |
(Right) | (Left) |
L |
R |
L |
R |
HIGH CH
Install remote control batteries
Caution
•• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.
•• Risk of decreased battery life! Never mix different brands or types of batteries.
•• Risk of product damage! When the remote control is not used for long periods, remove the batteries.
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct polarity
3 Close the battery compartment.
3 1
2 
