Master Bilt K manual Introduction, Store Conditions

Page 4

INTRODUCTION

Thank you for purchasing a Master-Bilt cabinet. This manual contains important instructions for installing, using, and servicing a Master-Bilt BLG/TLG case. A parts list is included with this manual. Read all these documents carefully before installing or servicing your equipment.

STORE CONDITIONS

The Master-Bilt BLG/TLG cases are designed to operate in the controlled environment of an air-conditioned store. The store temperature should be at or below 75°F and a relative humidity of 55% or less. At higher temperature or humidity conditions, the performance of these cases may be affected and the capacity diminished.

The Master-Bilt BLG/TLG should not be positioned where it is directly exposed to rays of sun or near a direct source of radiant heat or airflow. This will adversely affect the case and will result in poor performance.

If this case is to be located against a wall, there should be at least 6” space between the wall and the back of the case. This space will allow for the circulation of air behind the case, which will prevent condensation on the exterior surfaces.

NOTICE

Read this manual before installing your cabinet. Keep the manual and refer to it before doing any service on the equipment. Failure to do so could result in personal injury or damage to the cabinet.

DANGER

Improper or faulty hook-up of electrical components on the refrigeration units can result in severe injury or death.

All electrical wiring hook-ups must be done in accordance with all applicable local, regional or national standards.

NOTICE

Installation and service of the refrigeration and electrical components of the cabinet must be performed by a refrigeration mechanic and/or a licensed electrician.

The portions of this manual covering refrigeration and electrical components contain technical instructions intended only for persons qualified to perform refrigeration and electrical work.

This manual cannot cover every installation, use or service situation. If you need additional information, call or write us:

Customer Service Department

Master-Bilt Products

Highway 15 North

New Albany, MS 38652

Phone 800-684-8988

Fax 866-882-7629

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Installation & Operations Manual Page Table of Contents Introduction Store ConditionsGround Required For Safe Operation PRE-INSTALLATION Instructions Installation InstructionsInspection for Shipping Damage General InstructionsElectrical Tension needs to be checked and set when first install DoorsMASTER-BILT Electronic Refrigeration Control Operation Manual DefrostHOW to Change the Setpoint HOW to Change a parameter valueElectrical Connections Alarm SignalsPart Voltage Amps AT Rating Cabinet Volts 115 Volts Service Instruction Final Check ListTemperature sensor, defrost heater and fan motor replacement MASTER-BILT Part List BLG/TLGSale and Disposal Owner ResponsibilityPage Page Page

K specifications

Master Bilt K is a renowned name in the foodservice industry, primarily recognized for its high-quality refrigeration solutions. The brand has carved out a reputable niche for itself due to its commitment to excellence in design, performance, and reliability. Master Bilt K products are tailored to meet the needs of commercial kitchens, convenience stores, restaurants, and other foodservice operations that demand efficiency and reliability.

One of the standout features of Master Bilt K refrigeration units is their exceptional energy efficiency. Utilizing advanced refrigeration technologies, these units are designed to consume less energy while providing optimal cooling performance. This helps businesses reduce operational costs and is increasingly important in the face of rising energy prices. The use of environmentally-friendly refrigerants further aligns Master Bilt K with today's sustainability standards.

The construction quality of Master Bilt K products is equally impressive. The units are built from durable materials to withstand the rigors of commercial use. Stainless steel exteriors not only offer a sleek, modern appearance but also provide resistance to corrosion and dents, ensuring longevity. The interiors are designed for easy cleaning, featuring smooth surfaces and rounded corners that help maintain hygiene standards in food preparation areas.

In terms of technology, Master Bilt K incorporates state-of-the-art temperature control systems. Many models include digital thermostats and advanced monitoring capabilities that ensure consistent temperatures, critical in preserving the freshness of perishable goods. Additionally, the units often feature high-performance compressors that facilitate rapid cooling, minimizing fluctuation during peak usage times.

Another notable characteristic is the versatility of Master Bilt K refrigeration solutions. They offer a range of products, including reach-in refrigerators, walk-in coolers, and display cases, designed to cater to the diverse needs of foodservice establishments. This product variety ensures that operators can find the right fit for their specific space constraints and operational requirements.

User-friendly features are also a hallmark of Master Bilt K equipment. Many units are designed with easy-to-use controls and adjustable shelving, enhancing usability and efficiency in busy kitchen environments.

Overall, Master Bilt K stands out as a brand trusted by industry professionals for its innovative technologies, durable construction, and commitment to energy efficiency. Whether for a bustling restaurant or a small café, Master Bilt K offers refrigeration solutions that ensure the highest standards of performance and reliability, making them a leader in the commercial refrigeration market.
Top Page Image Contents