Vinotemp VINO6500HZD, VINO4500HZD manual Care Guide, Coil Cleaning, Moisture Removing, Drain Line

Page 17

Care Guide

1. Coil Cleaning

Clean the condenser coil regularly. Coil may need to be cleaned at least every 6 months.

Coil is on the ambient air intake side of the cooling unit.

Unplug the unit or disconnect power.

Use a condenser brush or a vacuum cleaner with an extended attachment to clean the coil when it is dusty or dirty.

Plug the cooling unit or reconnect power.

2. Moisture Removing

Remove the extra condensate if it is accumulated in the wine cellar at high humidity condition.

3. Drain Line

VINO3500-8500HZD units are equipped with a drain line fitting. In case there is a drain line needed, remove the drain plug on the bottom left at the rear, then remove the fitting plug, add a drain tube onto the drain fitting, 0.25” ID tube for VINO3500-4500HZD and 0.5”ID tube for VINO6500-8500HZD

- 16 -

Image 17
Contents WINE-MATECooling Unit Important Safety Information Table of Contents Feature Descriptions Feature DescriptionDimensions VINO1500-2500HZD Cabinet Installation Installation InstructionCabinet Cutout & Gasket LIP TOP Exhaust Gasket Cooling Unit VINO3500-8500HZD Through Wall Installation Through Wall Installation Electrical Cord Cellar ConstructionTemperature Setting Temperature Control & Humidity AdjustmentPage Humidity Adjustment Manual Defrost Care Guide Coil CleaningMoisture Removing Drain LineTroubleshooting Blinking HA alarmBeeping High or notCircuit Water leakTripping NoisyVINO1500-2500HZD Calling Feature Wiring Diagram VINO1500-2500HZD Wiring DiagramVINO3500-8500HZD Wiring Diagram Customer Support Service under Warranty WarrantyLimited Warranty Limitation of Implied Warranty