
3 Inspect & Plan
Product Registration
You have received a carton containing your 
Models Covered
This installation guide covers the following models.
Tools / Material Required
•Screwdrivers — slotted and Phillips head
•
(optional for finishing wood fronts)
•Minwax® 
•Minwax® Polycrylic® Protective Finish
•Foam Applicator and / or Synthetic Bristle Brush
•220 grit Sandpaper
•280 grit Sandpaper
Exterior Cleaning
(As Required)
Black and White Models:
| • Black and White surfaces may be cleaned with a mild detergent | 
| and warm water solution. Do not use  | 
| cleaners. Use a soft sponge and rinse with clean water. Wipe | 
Inspection
| with a soft, clean towel to prevent water spotting. | 
Stainless Models:
| • Stainless door panels, handles and frames can discolor when | 
| exposed to chlorine gas, pool chemicals, salt water or cleaners | 
| with bleach. | 
| • Clean any glass door fronts with a  | 
| • Keep your Stainless unit looking new by cleaning with a good | 
| quality  | 
| basis. For best results use Claire Stainless Steel Polish and | 
| Cleaner, which can be purchased from  | 
| (Part numbers 173348). Frequent cleaning will remove surface | 
| contamination that could lead to rust. Some installations may | 
| require cleaning on a weekly basis. | 
| • Do not clean with steel wool pads. | 
| • Use of abrasive pads such as Scotchbrite will cause the | 
| graining in the stainless to become blurred. | 
| • Do not use stainless steel cleaners/polishes on any glass | 
| surfaces. | 
| • Do not use cleaners that are not specifically intended | 
| for stainless steel on stainless surfaces (this includes | 
| glass, tile and counter cleaners). | 
| • If any surface discolors or rust appears, clean it quickly with | 
Unwrap and inspect the unit on a flat, level surface capable of supporting it’s entire weight.
| cloth. Always clean in the direction of the grain. Always finish | 
| this process with Claire Stainless Steel Polish and Cleaner or | 
| comparable product to prevent further problems. | 
 WARNING
WARNING
Rust that is allowed to linger can penetrate into the surface of the stainless steel and complete removal of the rust may not be possible.
| 2 |