U-Line 3018 CLR 115 V / 60 Hz quick start ICE Adjust

QUICK START GUIDE

u-line.com

12.7mm) in depth. A fuller cube with less of a dimple results in a thicker ice bridge. As the ice bridge thickens, the tendency for the cubes to stay together as a slab increases. A bridge thicker than 1/8" (3.2 mm) may cause cubes to overfill the ice bucket.

DIMPLES

ICE BRIDGE

Ice Bridge and Dimples

Your clear ice machine is pre-set to produce ice between the optimal dimensions illustrated below:

	Cube Types
1/4" TO 1/2"		1/16" TO 1/8"
(6.4 mm to 12.7 mm)		(1.6 mm to 3.2 mm)
DIMPLE		ICE BRIDGE

ICE ADJUST

Up

Select

RETURN TO MENU

ICE ADJUST

ICE ADJUST = 0

Down

Adjust ice thickness as follows:

1.Press and and hold for 5 seconds to enter the Customer Menu.

2.Press to select “Ice Adjust”.

3.Press . The selection will begin to flash.

4.Press to make the ice thicker or to make the ice thinner. Press to confirm your choice.

The total range of adjustment is -5 (thinest) to +5 (thickest). If further adjustments are desired, repeat Steps 1 through 4.

	THIN BRIDGE	THICK BRIDGE
DEEP DIMPLE		LITTLE OR
		NO DIMPLE

9