U-Line 3018 CLR 115 V / 60 Hz quick start Factory Installed Drain Pump

Page 8

QUICK START GUIDE

u-line.com

!CAUTION

Y-Branch Tailpiece

P60 Pump Required

Air Gap

(Optional Hook-Up)

Failure to connect water supply or drain line connections properly can result in personal injury and property damage. Gravity drain connections must be routed downward from the rest of the unit at the rate of 1/4" per foot (1 cm per 50 cm).

FACTORY INSTALLED DRAIN PUMP

If your drain line will run up to a stand pipe, disposal or spigot assembly, or does not otherwise meet the requirements for a gravity drain, you may have ordered a pre-installed U-Line P60 drain pump.

See below for typical installations requiring a drain pump.

	Waste
	6KXW2ɞ
	Valve
	Cold
Hot	Water
Water
NOTICE

The maximum lift for the P60 drain pump is

10 feet. This must be done as close to the rear of the unit as possible.

Stand Pipe

P60 Pump Required

Waste

6KXW2ɞ Valve

Cold

Hot Water

Water

Waste

Disposal Assembly

P60 Pump Required

Air Gap

(Optional Hook-Up)

	Waste
	Cold
Hot	Water
Water
	6KXW2ɞ
	Valve

5

Image 8

Contents Quick Start Guide Service Information General Inquiries Connect with US Service & Parts AssistanceWelcome to U-LINE Product Information Property Damage / Injury ConcernsContents Model List Clear Ice MachinesEnvironmental Requirements Safety and WarningSafety Alert Definitions Water Hookup Prepare PlumbingGravity Drain DrainDrain Connection Factory Installed Drain Pump Stainless Door SwingIntegrated General Installation Installation TIPInstallation Leveling InformationFunction Command DISPLAY/OPTIONS ICE Cube Thickness AdjustmentControl Quick Guide First UseICE Adjust Line Corporation Limited Warranty Sabbath ModeWarranty Quick Start Guide