U-Line 2175BEVOL2 manual Single Unit Installation

Page 15

2175BEV/2175BEVOL2 Beverage Center

2.Place the unit into the area where it will be installed. Check the door, sides and top for a proper fit. Also test the make sure the door opens and closes freely.

3.Remove grille and place mark on the floor at the front of the unit. Also place a mark on the floor in the center of the unit (Figure 27).

Marks on floor

Figure 27

4.Remove the unit. Using a square, extend a centerline 20-1/4” toward the back wall (Figure 28). At the back of the centerline, mark a line that measures 11-1/16” to the left and right. This line services as the back edge for the Anti-Tip brackets and its furthest points mark the outer edge of each bracket.

Note: Instructions are shown for built-in installation. Use same dimensions for free-standing installation.

 

 

Back

Line Marks

 

 

Back

Front

 

Wall

 

of Unit

 

 

of Unit

 

 

 

 

 

 

20-1/4"

Marks

11-1/16"

 

11-1/16"

on Floor

 

 

 

Centerline

Figure 28

5.Place the Anti-Tip brackets on the floor against the line drawn for the outer edge. Mark spots for the screw holes (Figure 29).

6.Use a 1/8” drill to make two starter holes and fasten the Anti-Tip brackets to the floor using the screws provided.

Drill Holes and

Mount Anti-Tip

Brackets to Floor

Back

Wall

Back

of Unit

Front

of Unit

Figure 29

CAUTION

Other hardware is required for floors made of materials other than wood.

7.Place the unit back into position, making sure the feet engage the Anti-Tip brackets properly. Check the alignment of the lines made on the floor in step 3 with the position of the front feet to ensure proper positioning.

SINGLE UNIT INSTALLATION

1.Remove the two screws from the opposite side of the hinge assembly using a Phillips screwdriver (Figure 30).

Right–handed units shown, Left–handed units are mirrored

Figure 30

2.Place bracket (part # 14154) over holes and attach to unit with two screws removed in step 1 using a Phillips screwdriver. Tighten screws fully.

3.Recheck the leveling, from front to back and side to side. Make any necessary adjustments. The unit's top surface should be approximately 1/8" below the countertop.

4.Secure bracket into adjoining surface.

03/2008

15

www.U-LineService.com

Image 15
Contents Installation Guide Follow Safety Precautions ContentsInspect and Plan General PrecautionsExterior Cleaning Cut-Out DimensionsPrepare Site Other Site Requirements Product Dimensions Door Swing/Clearances InformationSide-By-Side Installation Instructions Wine Rack Removal/InstallationPrepare Racks and Door Frame Staining and final finish application Wood Trim FinishingReversing the Door Door pivot plate Bottom hinge screw pin Frame Preparation Overlay FrameAttaching the Overlay Panel Prepare the NEW Overlay PanelAssembling Door to Cabinet Door closersAdjusting Door Alignment Adjust DoorChecking Door Alignment Electrical Specifications Installation TipLeveling Information Right-handed units shown, Left-handed units are mirrored Single Unit InstallationStart-Up for the First Time Start-Up TroubleshootingService Information Initial Start-Up

2175BEVOL2 specifications

The U-Line 2175BEVOL2 is a premium undercounter refrigerator that combines style, convenience, and advanced technology, making it an ideal addition to kitchens, bars, and outdoor spaces. Designed for both functionality and aesthetics, this model offers an impressive capacity and a myriad of features that set it apart in the competitive market of refrigeration.

One of the standout features of the U-Line 2175BEVOL2 is its versatile temperature control. It allows users to maintain temperatures between 34°F and 70°F, accommodating a variety of items, from beverages to fresh produce. The seamless integration of this refrigerator into various environments is facilitated by its ability to be used either as a built-in unit or a freestanding appliance, providing flexibility in positioning according to space requirements.

Aesthetic appeal is further enhanced by the unit's elegant stainless steel finish and glass door, which not only looks modern and sophisticated but also allows easy visibility of its contents. The interior of the refrigerator is thoughtfully designed with LED lighting that illuminates the shelves and compartments, making it easy to locate items even in low light situations.

The U-Line 2175BEVOL2 also boasts advanced cooling technologies, such as the U-Line's exclusive "U-Choose" temperature control and a digital display for easy adjustments. These features help maintain consistent temperatures, ensuring food and beverages retain their freshness longer.

Storage capacity is not compromised, with adjustable shelves that cater to various item sizes, and a built-in ice maker that produces a generous amount of ice, perfect for entertaining guests. Additionally, the refrigerator features a low-energy consumption rating, making it an eco-friendly choice without sacrificing performance.

Another noteworthy characteristic is the U-Line 2175BEVOL2's whisper-quiet operation, allowing it to fit seamlessly into any setting without disruptive noise. The unit's sophisticated design does not only provide superior functionality but also enhances the overall aesthetic of your space.

In summary, the U-Line 2175BEVOL2 is not just a refrigerator; it is a statement of style and innovation in refrigeration technology. Its combination of aesthetic appeal, cutting-edge cooling features, and user-friendly design makes it an excellent investment for those looking to elevate their kitchen or entertainment area. Whether hosting gatherings or simply enjoying a quiet evening at home, the U-Line 2175BEVOL2 promises to deliver exceptional performance and reliability.