U-Line 2175BEVOL2 manual Door closers, Assembling Door to Cabinet

Page 12

2175BEVS/2175BEVOL2 Beverage Center

 

DOOR FRAME

 

TAPE

TOP OF

BOTTOM OF

OVERLAY

 

OVERLAY

 

ULIN_0418_A

Figure 17

12.Use the door frame holes as a guide to lightly punch pilot holes for the #6 x 1” pan head screws (Figure 18).

Figure 18

13.Attach the door to the overlay using #6 x 1” wood screws.

IMPORTANT

If you decide to drill pilot holes, remove the wood overlay from the door, and do not use a drill larger than 7/64”, and do not drill deeper than 3/8”. The door frame and wood overlay must be aligned properly or the door will not operate correctly.

Note: After attaching the wood to the door, double check the bottom pivot hole location. If the hole in the pivot bracket is covered by any wood, chase thru the hole with a 11/32” drill to open hole in door panel. DO NOT drill deeper than 1/4” deep.

ASSEMBLING DOOR TO CABINET

14.Starting at the corners and working toward the center, push the door gasket back into place. Make sure gasket is fully seated on all four sides and corners.

15.Check the closure assembly on the bottom hinge to be sure it is seated correctly in the bosses in the hinge.

16.Position door over closer. Be sure the door hinge plate holes align with the bosses on the closer (Figure 19). Failure to do so will result in the door not sitting in the proper position and door will not align correctly. (Sometimes it is helpful to open the door 180° to have the closer and pivot plate align correctly.)

Door closers

ULIN 0004 A

Figure 19

17.Holding the door in the closed position, install the pivot post (removed in step 7) thru the top hinge into the top pivot plate. Tighten securely with a Phillips screwdriver, making sure post is seated fully.

18.Adjust door as needed for proper closure. Refer to the following section for adjustment procedures.

www.U-LineService.com

12

03/2008

Image 12
Contents Installation Guide Contents Follow Safety PrecautionsGeneral Precautions Inspect and PlanExterior Cleaning Cut-Out DimensionsPrepare Site Product Dimensions Door Swing/Clearances Information Other Site RequirementsSide-By-Side Installation Instructions Wine Rack Removal/InstallationPrepare Racks and Door Frame Wood Trim Finishing Staining and final finish applicationReversing the Door Door pivot plate Bottom hinge screw pin Overlay Frame Frame PreparationPrepare the NEW Overlay Panel Attaching the Overlay PanelDoor closers Assembling Door to CabinetAdjusting Door Alignment Adjust DoorChecking Door Alignment Electrical Specifications Installation TipLeveling Information Single Unit Installation Right-handed units shown, Left-handed units are mirroredStart-Up Troubleshooting Service InformationInitial Start-Up Start-Up for the First Time

2175BEVOL2 specifications

The U-Line 2175BEVOL2 is a premium undercounter refrigerator that combines style, convenience, and advanced technology, making it an ideal addition to kitchens, bars, and outdoor spaces. Designed for both functionality and aesthetics, this model offers an impressive capacity and a myriad of features that set it apart in the competitive market of refrigeration.

One of the standout features of the U-Line 2175BEVOL2 is its versatile temperature control. It allows users to maintain temperatures between 34°F and 70°F, accommodating a variety of items, from beverages to fresh produce. The seamless integration of this refrigerator into various environments is facilitated by its ability to be used either as a built-in unit or a freestanding appliance, providing flexibility in positioning according to space requirements.

Aesthetic appeal is further enhanced by the unit's elegant stainless steel finish and glass door, which not only looks modern and sophisticated but also allows easy visibility of its contents. The interior of the refrigerator is thoughtfully designed with LED lighting that illuminates the shelves and compartments, making it easy to locate items even in low light situations.

The U-Line 2175BEVOL2 also boasts advanced cooling technologies, such as the U-Line's exclusive "U-Choose" temperature control and a digital display for easy adjustments. These features help maintain consistent temperatures, ensuring food and beverages retain their freshness longer.

Storage capacity is not compromised, with adjustable shelves that cater to various item sizes, and a built-in ice maker that produces a generous amount of ice, perfect for entertaining guests. Additionally, the refrigerator features a low-energy consumption rating, making it an eco-friendly choice without sacrificing performance.

Another noteworthy characteristic is the U-Line 2175BEVOL2's whisper-quiet operation, allowing it to fit seamlessly into any setting without disruptive noise. The unit's sophisticated design does not only provide superior functionality but also enhances the overall aesthetic of your space.

In summary, the U-Line 2175BEVOL2 is not just a refrigerator; it is a statement of style and innovation in refrigeration technology. Its combination of aesthetic appeal, cutting-edge cooling features, and user-friendly design makes it an excellent investment for those looking to elevate their kitchen or entertainment area. Whether hosting gatherings or simply enjoying a quiet evening at home, the U-Line 2175BEVOL2 promises to deliver exceptional performance and reliability.