Tappan 316000182 To Clean the Cooktop, To Clean the Contoured Well Areas

Page 15

General Cleaning

(continued)

Unlike the standard gas range, THIS COOKTOP IS NOT REMOVABLE. Do not attempt to remove or lift the cooktop.

Note: The burner cap assembly refers to all parts of the sealed burner unit (burner cap, burner pan (some models), trim ring (some models), locating tab, burner base and electrode).

Use caution when replacing the burner cap so the electrode is not damaged. This may cause a delayed ignition or prevent the burner from igniting.

Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by an authorized Frigidaire or Tappan Distributor or Qualified Agency.

To Clean the Cooktop

The cooktop is designed to make cleaning easier. Because the four burners are sealed, cleanups are easy when spillovers are cleaned up immediately.

To clean, wipe with a clean, damp cloth and wipe dry.

To Clean the Contoured Well Areas, Burner Cap Assembly, Trim Ring (some models), Burner Pan (some models) and Burner Base

The contoured well areas, burner cap assembly, trim ring (some models), burner pan (some models) and burner base should be routinely cleaned. Keeping the burner ports clean will prevent improper ignition and an uneven flame. See instructions below.

To Clean the Contoured Well Areas

The contoured well is a recessed area located around each burner unit. If a spill occurs in one of the four well areas, blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry.

To Remove the Burner Cap Assembly

The burner cap assembly parts differ per model. Your assembly will consist of one of the following combinations: burner cap and trim ring; burner cap and burner pan; or burner cap, trim ring and burner pan. Remove in the following order: (1st) burner cap, (2nd) trim ring and (3rd) burner pan. Do not operate the burners without the burner cap assembly in place.

To Clean the Burner Cap, Burner Pan (some models) and Trim Ring (some models)

Use a soap-filled scouring pad or a mild abrasive cleanser to clean burner caps, trim rings and burner pans.

To Clean the Burner Base and Gas Opening

The ports (or slots) around the burner base must be routinely cleaned. Use a small-gauge wire or needle to clean small slots or holes.Use care to prevent damage to the electrode. If a cleaning cloth should catch the electrode, it could break or damage the electrode. If the electrode is damaged or broken, the surface burner will not light.

For proper flow of gas and ignition of the burner—DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS OPENING. Gas must flow freely through the small hole in the brass orifice for the burners to light properly. If the orifice gas opening becomes soiled or clogged, use a small-gauge wire or needle to clean. ALWAYS keep the burner cap assembly in place whenever a surface burner is in use.

To Replace the Burner Cap Assembly

Make sure the burner cap assembly is thoroughly dry before placing back on the burner.

1.Lower burner pan (some models) into place around the burner base.

2.Replace trim ring (some models).

3.Find the locating tabs on the burner cap and place in the locating slots in the burner base. Make sure each burner cap is properly aligned and level.

4.Turn the burner on to determine if it will light. If the burner does not light after cleaning, contact an authorized servicer. Do not service the sealed burner yourself.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GAS Range Versión en español Product RegistrationRegister Your Product Record Your Model and Serial NumbersImportant Safety Instructions Grounding Instructions Important Safety InstructionsFor a silent control panel Temperature conversionControl Pad Functions Oven can be programmed toTo Cancel the Minute Timer before the set time has run out Setting the Clock and Minute TimerTo Set the Minute Timer To Change the Minute Timer while it is in useTo operate the surface burner Proper Burner AdjustmentsSetting Surface Controls Flame SizeArranging Warmer Drawer Rack Positions Setting Warmer Drawer ControlsIndicator Light Temperature SelectionTo Set the Controls for Normal Baking Setting Oven ControlsTo Set or Change the Temperature for Normal Baking To Change the Oven Temperature after Baking has StartedTo Set the Automatic Timer Timed Bake Feature When the Set Bake Time Runs OutOnce the Controls are Set Rack Position From Top Food To BroilAdhere to the following cleaning precautions Oven CleaningSelf-Cleaning Oven Stopping or Interrupting a Self-Cleaning CycleTo Start the Self-Clean Cycle To Set the Controls for a Self-Clean CycleWhen the Self-Clean Cycle is Completed Cleaning Various Parts of Your Range General CleaningTo Clean the Burner Base and Gas Opening To Clean the CooktopTo Clean the Contoured Well Areas To Remove the Burner Cap AssemblyTo Remove and Replace Gas Warmer Drawer if equipped To Remove and Replace Oven DoorAdjusting Oven Temperature Changing Oven LightTo Change the Oven Light some models Surface burner flame is orange Avoid Service ChecklistNot Operate see below Self-Cleaning cycle does not workUnder Oven Cleaning Oven does not operateTappan Range Warranty

316000182 specifications

The Tappan 316000182 is a noteworthy appliance in the realm of home cooking, especially known for its versatility and advanced features designed to enhance culinary experiences. This model serves as a powerful built-in double wall oven, which provides excellent baking capabilities suitable for both professional chefs and home cooking enthusiasts.

One of the main features of the Tappan 316000182 is its spacious interior, allowing for the preparation of multiple dishes simultaneously. The two ovens operate independently, giving users the flexibility to cook various items at different temperatures and times. This feature comes in particularly handy during family gatherings or special occasions when multiple dishes need attention.

The Tappan 316000182 is equipped with state-of-the-art convection technology. This system circulates hot air throughout the oven cavity, ensuring even cooking and browning for all dishes. The convection mode significantly reduces cooking time while enhancing the flavors of the food. This technology is particularly beneficial for baking, as it ensures that pastries rise perfectly and meats brown evenly, adding a delightful crust and locking in moisture.

Another distinctive characteristic of the Tappan 316000182 is its user-friendly digital control panel. The intuitive interface allows users to easily set cooking functions, adjust temperatures, and program timers. This modern feature simplifies the cooking process, helping even novice chefs achieve perfect results with minimal hassle.

In terms of safety, the Tappan 316000182 includes a variety of safety mechanisms. Features like the cool-touch door and a safety lock ensure that the appliance remains user-friendly, even in households with children. A self-cleaning option further enhances safety and convenience by allowing users to maintain their ovens with ease, eliminating the need for harsh chemical cleaners.

The appliance's sleek design adds an aesthetic touch to any kitchen. With its stainless steel finish, the Tappan 316000182 not only embodies elegance but also ensures durability and ease of cleaning.

With a combination of advanced technology, ample cooking space, and safety features, the Tappan 316000182 proves to be a reliable and efficient companion in the kitchen, significantly elevating the home cooking experience.
Top Page Image Contents