en | en |
|
|
Prior to startup
Before you begin operating your device, the following points should be
•Is the device standing properly on the floor?
•Is there sufficient space for good air circulation?
•Is the interior clean? (Also see the section “Cleaning and care”)
•Set the thermostat knob half way between
1 and 5 or Min. and Max.
•Now connect the device to the mains.
The compressor is turned on; the interior light comes on when the door is opened.
Do not place foodstuff into the refrigerator until the temperature has reached the desired level.
Setting the operating temperature
(Fig. 2)
The operating temperature is regulated by the temperature control.
Warm |
|
|
| Cold |
1 | 2 | 3 | 4 | 5 |
(Or) Min. |
|
|
| Max. |
1 = Lowest cooling setting (Warmest setting)
5 = Highest cooling setting (Coldest setting)
(Or)
Min. = Lowest cooling setting (Warmest setting)
Max. = Highest cooling setting (Coldest setting)
The average temperature inside the fridge should be around +5°C.
Please choose the setting according to the desired temperature.
You can stop operation of your device by adjusting the thermostat knob to “0” position.
Please note that there will be different temperatures in the cooling area.
The coldest region is immediately above the vegetable compartment.
The interior temperature also depends on ambient temperature, the frequency with which the door is opened and the amount of foods kept inside.
Frequently opening the door causes the interior temperature to rise.
For this reason, it is recommended to close the door again as soon as possible after use.
4