Temperature Ranges

This water heater will attempt to provide hot water at the temperature setting even when the water flow is varied or when more than 1 tap is in use. The water heater can deliver water at only one temperature setting at a time. The available temperatures for a given model are provided below.

Model

 

 

 

 

Temperature Settings Available (ºF)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

305

98

100

102

104

106

108

110

115

120

125

130

135

140

150

160

 

 

 

 

 

 

 

 

 

 

 

*

*

*

*

**

**

 

505

98

100

102

104

106

108

110

115

120

125

130

135

140

150

160

185

 

 

 

 

 

 

 

 

 

 

*

*

*

*

**

**

**

705

98

100

102

104

106

108

110

115

120

125

130

135

140

150

160

185

 

 

 

 

 

 

 

 

 

 

 

 

 

 

**

**

**

Temp in Celsius ºC

37

38

39

40

41

42

43

46

49

52

54

57

60

66

71

85

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Re-setting the Maximum Temperature

Models 305 and 505 have a default maximum temperature of 120º F (49º C) and an option to increase the maximum temperature to 140 ºF (60 ºC). Temperature settings from 125-140 ºF (52-60 ºC) are available by setting dip switch 6 to ON in the SW1 bank of 8 dip switches.

Model 705 has a default maximum temperature of 140 ºF (60 ºC).

**Commercial Controller

These settings require the commercial controller which is for commercial and hydronic applications requiring higher temperatures. When the commercial controller is connected, these higher temperatures are available on all controller models in the system.

The commercial controller is intended for commercial and hydronic applications only. If commercial controller is used in a residential dwelling for a hydronics application, a mixing valve must also be installed to limit the potable hot water temperature to a safe temperature. Water temperatures over 125º F (51º C) can cause severe burns or scalding. Refer to the Danger Alert on water temperatures. The manufacturer shall not, in any event, be liable for damages resulting from such misuse or misapplication.

Suggested temperatures are

Kitchen

120 ºF (49º C)

Shower

98º - 110º F (37º - 43º C)

These temperatures are suggestions only.

A temperature lower than 98º F (37º C) can be obtained at the tap by mixing with cold water.

To change the temperature scale from Celsius to Fahrenheit or vice versa, press and hold the “On/Off” button for 5 seconds while the water heater is OFF.

Setting Controller to Mute

To eliminate the beeps when keys are pressed or to turn the beeps back on, press and hold both the ▲and ▼ buttons until a beep is heard (approximately 5 seconds).

305, 505, 705 Indoor Manual

7

Page 7
Image 7
State Industries 705 Series 200 Temperature Ranges, Setting Controller to Mute, Model Temperature Settings Available ºF