Smeg WT1123-1, WT112-1 instruction manual Washing programs, Table for Certification Bodies

Page 5

User instructions

TABLE FOR CERTIFICATION BODIES

 

 

 

 

 

Reference standard

 

EN 50242

 

 

 

 

Reference program

 

BIO

 

 

 

 

Load

 

12 place-settings

 

 

 

 

Type of detergent

 

B

 

 

 

 

Amount of detergent

 

30 g

 

 

 

 

Rinse aid setting

 

5/6

1.2 Washing programs

Before starting a washing program make sure that:

The water supply tap is open.

The correct amount of detergent has been added to the dispenser.

The baskets have been correctly loaded.

The spray arms are able to rotate freely and without obstruction.

The dishwasher door is securely closed.

HALF LOAD WASH SETTING (certain models only)

This function is ideal for small loads and saves water and electricity. It is controlled by the HALF LOAD button (6) and allows washing in the upper basket only.

IMPORTANT: at the end of the program remember to deactivate the function to ensure the next wash is not also carried out in half load mode by mistake.

A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.

CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of water will only reach the upper basket.

16

Image 5
Contents Guide for Using the Dishwasher and the Washing Programs Contents Upper panel Setting the Washing Program and Switching onDescription of the controls 110 Table for Certification Bodies Washing programsChanging the Program Cancelling the Current ProgramWater Hardness Table Adjusting the Water Softening SystemRemoving the Dishes END of CycleFault Description TroubleshootingWater loaded accurately. Interrupt the program For Cleaning Dishwashers Contents Safety and operating instructions Safety instructionsSafety instructions Aquastop Models Appliance Installation and hook-up Installation instructionsDrain Connection Connecting to the Water SupplyWater supply connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceOperating instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent Products General warnings and recommendations User instructions EN 50242 Standard Loads for Certification Bodies Using the basketsLoading the Lower Basket Lower BasketCutlery Basket Upper Basket Loading the Upper Basket Pull-out version Adjusting the Upper BasketCleaning the Spray Arms Cleaning and maintenanceCleaning the Water Intake Filter Prolonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that 598