INSTALLATION
4) FIXING
A special sealing strip underneath the hob for damage. Make sure it is correctly positioned with no gaps; it avoids any water infiltration. To fix in the right way the strip, please, respect the following instructions:
-Fix the hooks in the relative accomodations of the body (see fig. 8 or 9).
-Overturn the hob, take the seal strips off from their support, having care that the transparent protection remains attached to the seal. Correctly place the seal "E" (fig.10) under the hob edge, so that the external side of the seal fits together with the external perimentrical edge of the hob. The ends of the strip must fit together without overlapping.
-Stick the seal to the hotplate uniformly, pressing it with fingers.
-Take the protective paper strip of the seal off, place the hotplate in the opening made in the table top, and lock it with the special screws "F" (fig. 11).
WARNINGS:
Be aware that the glue that join the laminated plastic to the furniture, has to resist to temperature not below 150° C, to avoid the unstuck of the panelling.
The installer should bear in mind that the mixed appliance is the Y type. The rear wall, adjacent and surrounding surfaces must therefore be able to withstand an overtemperature of 65 K.
4 HEATING ELEMENTS
1 or 2 HEATING ELEMENTS
FIG. 8
FIG. 9
FIG. 10
FIG. 11
24