Smeg PGFA95F manual Instructions for the installer

Page 7

Instructions for the installer

Overall dimensions: location of gas and electrical connection points (all measures in mm).

Caution: surface temperature underneath may exceed 125 degrees C. To avoid a hazard, under-bench access must be restricted.

Refer to installation instruction

The appliance is equipped with 4 supplementary brackets for levelling if necessary (see detail B, fig. 5). The following figures show how to use the brackets.

IMPORTANT: when installing the appliance above a cupboard, a dividing shelf, as shown above, must be installed.

If installed above an under-bench oven, this is not required.

Installation of an oven without cooking fan underneath the hob is forbidden.

9

Image 7

Contents Contents Instructions for Safe and Proper USE IntroductionIntroduction Installation of the Appliance Instructions for the installerInstructions for the installer Figure, to avoid damage from overheating Attachment to support structure, flush-mounting modelInstructions for the installer Requirements Clearance above and around domestic appliancesRoom ventilation Discharge of combustion products GAS ConnectionElectrical connection Adaptation to Different Types of GAS Replacement of nozzles on the hobArrangement of burners on cooking hob Burner and nozzle characteristics tableFinal Operations Adjustment of minimum for natural gasLubrication of gas taps USE of the Cooking HOB Instructions for the userLighting the burners Diameter of containers Practical advice for using the burnersCleaning stainless steel Cleaning and MaintenanceCleaning of cooking hob components Preventive maintenance Problems and Causes